D-Link DWS-1008 Informations techniques

9DWS-1008 CLI Reference Guide D-Link Systems, Inc.Using the Command Line InterfaceTo see all the variations, type one of the commands followed by a qu

99DWS-1008 CLI Reference Guide D-Link Systems, Inc.IP Services Commandsshow interfaceDisplays the IP interfaces configured on the DWS-1008 switch.Synta

100DWS-1008 CLI Reference Guide D-Link Systems, Inc.IP Services Commandsshow ip aliasDisplays the IP aliases configured on the DWS-1008 switch.Syntax:

101DWS-1008 CLI Reference Guide D-Link Systems, Inc.IP Services Commandsshow ip dns (continued)The table below describes the fields in this display.Fie

102DWS-1008 CLI Reference Guide D-Link Systems, Inc.IP Services Commandsshow ip route (continued)Usage: When you add an IP interface to a VLAN that is

103DWS-1008 CLI Reference Guide D-Link Systems, Inc.IP Services Commandsshow ip route (continued)NH-Type Next-hop type: • Local - Route

104DWS-1008 CLI Reference Guide D-Link Systems, Inc.IP Services Commandsshow ip telnet (continued)The table below describes the fields in this display.

105DWS-1008 CLI Reference Guide D-Link Systems, Inc.IP Services Commandsshow ntp (continued)Field DescriptionNTP client State of th

106DWS-1008 CLI Reference Guide D-Link Systems, Inc.IP Services Commandsshow snmp communityDisplays the configured SNMP community strings.Syntax: show

107DWS-1008 CLI Reference Guide D-Link Systems, Inc.IP Services Commandsshow snmp countersDisplays SNMP statistics counters.Syntax: show snmp counters

108DWS-1008 CLI Reference Guide D-Link Systems, Inc.IP Services Commandsshow snmp notify profileDisplays SNMP notification profiles.Syntax: show snmp not

10DWS-1008 CLI Reference Guide D-Link Systems, Inc.Access CommandsUse access commands to control access to the Mobility Software System (MS

109DWS-1008 CLI Reference Guide D-Link Systems, Inc.IP Services Commandsshow snmp notify targetDisplays SNMP notification targets.Syntax: show snmp not

110DWS-1008 CLI Reference Guide D-Link Systems, Inc.IP Services Commandsshow snmp statusDisplays SNMP version and status information.Syntax: show snmp

111DWS-1008 CLI Reference Guide D-Link Systems, Inc.IP Services Commandsshow snmp status (continued)Field DescriptionSNMP minimum security

112DWS-1008 CLI Reference Guide D-Link Systems, Inc.IP Services Commandsshow snmp usmDisplays information about SNMPv3 users.Defaults: NoneAccess: Ena

113DWS-1008 CLI Reference Guide D-Link Systems, Inc.IP Services Commandsshow summertimeShows a DWS-1008 switch’s offset from its real-time clock.Synta

114DWS-1008 CLI Reference Guide D-Link Systems, Inc.IP Services Commandsshow timezoneShows the time offset for the real-time clock from UTC on a DWS-1

115DWS-1008 CLI Reference Guide D-Link Systems, Inc.IP Services Commandstelnet (continued)DWS-1008# telnet 10.10.10.90Session 0 pty tty2.d Trying 10.1

116DWS-1008 CLI Reference Guide D-Link Systems, Inc.IP Services CommandstracerouteTraces the route to an IP host.Syntax: traceroute host [dnf] [no-dns

117DWS-1008 CLI Reference Guide D-Link Systems, Inc.IP Services Commandstraceroute (continued)The first row of the display indicates the target

118DWS-1008 CLI Reference Guide D-Link Systems, Inc.IP Services CommandsNotes

11DWS-1008 CLI Reference Guide D-Link Systems, Inc.Access CommandsquitExit from the CLI session.Syntax: quitDefaults: NoneAccess: AllExamples: To en

119DWS-1008 CLI Reference Guide D-Link Systems, Inc.AAA CommandsAAA CommandsUse authentication, authorization, and accounting (AAA) commands to

120DWS-1008 CLI Reference Guide D-Link Systems, Inc.AAA Commandsclear authentication adminRemoves an authentication rule for administrative access thr

121DWS-1008 CLI Reference Guide D-Link Systems, Inc.AAA Commandsclear authentication dot1xRemoves an 802.1X authentication rule.Syntax: clear authenti

122DWS-1008 CLI Reference Guide D-Link Systems, Inc.AAA Commandsclear authentication macRemoves a MAC authentication rule.Syntax: clear authentication

123DWS-1008 CLI Reference Guide D-Link Systems, Inc.AAA Commandsclear location policyRemoves a rule from the location policy on a DWS-1008 switch.Synt

124DWS-1008 CLI Reference Guide D-Link Systems, Inc.AAA Commandsclear mac-userRemoves a user profile from the local database on the switch, for a user

125DWS-1008 CLI Reference Guide D-Link Systems, Inc.AAA Commandsclear mac-user groupRemoves a user profile from a MAC user group in the local database

126DWS-1008 CLI Reference Guide D-Link Systems, Inc.AAA Commandsclear mac-usergroup attrRemoves an authorization attribute from a MAC user group in th

127DWS-1008 CLI Reference Guide D-Link Systems, Inc.AAA Commandsclear userRemoves a user profile from the local database on the switch, for a user with

128DWS-1008 CLI Reference Guide D-Link Systems, Inc.AAA Commandsclear user groupRemoves a user with a password from membership in a user group in the

12DWS-1008 CLI Reference Guide D-Link Systems, Inc.System Services CommandsSystem Services CommandsUse system services commands to configure and

129DWS-1008 CLI Reference Guide D-Link Systems, Inc.AAA Commandsclear usergroup attrRemoves an authorization attribute from a user group in the local

130DWS-1008 CLI Reference Guide D-Link Systems, Inc.AAA Commandsset accounting {admin | console} (continued)stop-only Sends accounting records only

131DWS-1008 CLI Reference Guide D-Link Systems, Inc.AAA Commandsset accounting {dot1x | mac} (continued)ssid ssid-name SSID name to which this accou

132DWS-1008 CLI Reference Guide D-Link Systems, Inc.AAA Commandsset authentication adminConfigures authentication and defines where it is perform

133DWS-1008 CLI Reference Guide D-Link Systems, Inc.AAA Commandsset authentication admin (continued)Note: The syntax descriptions for the set authenti

134DWS-1008 CLI Reference Guide D-Link Systems, Inc.AAA Commandsset authentication console (continued)method1 At least one of up to four methods th

135DWS-1008 CLI Reference Guide D-Link Systems, Inc.AAA Commandsset authentication dot1xConfigures authentication and defines how and where it is perfor

136DWS-1008 CLI Reference Guide D-Link Systems, Inc.AAA Commands • eap-tls - EAP with Transport Layer Security (TLS): • Provides mutua

137DWS-1008 CLI Reference Guide D-Link Systems, Inc.AAA CommandsIf the user does not support 802.1X, MSS attempts to perform MAC authentication for th

138DWS-1008 CLI Reference Guide D-Link Systems, Inc.AAA Commandsmethod1 At least one of up to four methods that MSS uses to handlemethod2 authen

13DWS-1008 CLI Reference Guide D-Link Systems, Inc.System Services CommandsClear Prompt (continued)Examples: To reset the prompt, type the following c

139DWS-1008 CLI Reference Guide D-Link Systems, Inc.AAA CommandsIf the SSID specified in the last-resort authentication rule is any, MSS se

140DWS-1008 CLI Reference Guide D-Link Systems, Inc.AAA Commandsset authentication mac (continued)Usage: You can configure different authentication

141DWS-1008 CLI Reference Guide D-Link Systems, Inc.AAA Commandsset authentication proxy (continued)Defaults: None Acces: EnabledUsage: AAA for third-

142DWS-1008 CLI Reference Guide D-Link Systems, Inc.AAA Commandsset location policyCreates and enables a location policy on a DWS-1008 switch. A locat

143DWS-1008 CLI Reference Guide D-Link Systems, Inc.AAA Commandsset location policy (continued)vlan operator VLAN-Name attribute assigned by AAA and

144DWS-1008 CLI Reference Guide D-Link Systems, Inc.AAA Commandsset location policy (continued)Usage: Only a single location policy is allowed per DWS

145DWS-1008 CLI Reference Guide D-Link Systems, Inc.AAA Commandsset location policy (continued)The following command authorizes users entering the net

146DWS-1008 CLI Reference Guide D-Link Systems, Inc.AAA Commandsset mac-user attr (continued)Syntax: set mac-user mac-addr attr attribute-name value

147DWS-1008 CLI Reference Guide D-Link Systems, Inc.AAA Commands • Use acl-name.in to filter traffic that enters th

148DWS-1008 CLI Reference Guide D-Link Systems, Inc.AAA Commandsservice-type (continued) • 6 - Administrative; for admi

14DWS-1008 CLI Reference Guide D-Link Systems, Inc.System Services CommandshelpDisplays a list of commands that can be used to configure and monitor th

149DWS-1008 CLI Reference Guide D-Link Systems, Inc.AAA Commandsset mac-user attr (continued)start-date Date and time at which Date and time, i

150DWS-1008 CLI Reference Guide D-Link Systems, Inc.AAA Commandsset mac-user attr (continued)vlan-name Virtual LAN (VLAN) Name of a VLAN that

151DWS-1008 CLI Reference Guide D-Link Systems, Inc.AAA Commandsset mac-usergroup attr (continued)Syntax: set mac-usergroup group-name attr attribute

152DWS-1008 CLI Reference Guide D-Link Systems, Inc.AAA CommandsDefaults: No default Mobility Profile exists on the DWS-1008 switch. If you do not ass

153DWS-1008 CLI Reference Guide D-Link Systems, Inc.AAA Commandsenable Enables the use of the Mobility Profile feature on the switch. disable Specifie

154DWS-1008 CLI Reference Guide D-Link Systems, Inc.AAA Commandsset user attr Configures an authorization attribute in the local database on the switch

155DWS-1008 CLI Reference Guide D-Link Systems, Inc.AAA Commandsset user group (continued)Defaults NoneAccess: EnabledUsage: MSS does not require use

156DWS-1008 CLI Reference Guide D-Link Systems, Inc.AAA Commandsshow aaaDisplays all current AAA settings. Syntax: show aaa Defaults NoneAccess: Enab

157DWS-1008 CLI Reference Guide D-Link Systems, Inc.AAA Commandsuser last-resort-any Vlan-Name = foo mac-user 01:02:03:04:05:06 usergroup eastcoasters

158DWS-1008 CLI Reference Guide D-Link Systems, Inc.AAA Commandsshow aaa (continued)Field Description Ports UDP ports that the switch

15DWS-1008 CLI Reference Guide D-Link Systems, Inc.System Services CommandshistoryDisplays the command history buffer for the current CLI session.Synt

159DWS-1008 CLI Reference Guide D-Link Systems, Inc.AAA CommandsThe table below describes the fields that can appear in show accounting sta

160DWS-1008 CLI Reference Guide D-Link Systems, Inc.AAA Commandsshow location policyDisplays the list of location policy rules that make up the locati

161DWS-1008 CLI Reference Guide D-Link Systems, Inc.AAA CommandsNotes

162DWS-1008 CLI Reference Guide D-Link Systems, Inc.AAA CommandsNotes

163DWS-1008 CLI Reference Guide D-Link Systems, Inc.Access Point CommandsUse DWL-8220AP access point commands to configure and manage DWL-8220AP access

164DWS-1008 CLI Reference Guide D-Link Systems, Inc.Access Point CommandsExamples: The following command disables and resets radio 2 on the DWL-8220

165DWS-1008 CLI Reference Guide D-Link Systems, Inc.Access Point CommandsThe following commands disable the radios that are using radio profile rptest

166DWS-1008 CLI Reference Guide D-Link Systems, Inc.Access Point CommandsUsage: When you enter this command, the DWL-8220AP access point drops all

167DWS-1008 CLI Reference Guide D-Link Systems, Inc.Access Point Commandsmode enabled tx-pwr Highest setting allowed for the country

168DWS-1008 CLI Reference Guide D-Link Systems, Inc.Access Point CommandsSyntax: set dap auto [radiotype {11a | 11b| 11g}]radiotype 11a | 11b | 11g

16DWS-1008 CLI Reference Guide D-Link Systems, Inc.System Services Commandsset confirmEnables or disables the display of confirmation messages for comma

169DWS-1008 CLI Reference Guide D-Link Systems, Inc.Access Point Commands For example, if an DWL-8220AP is dual homed to two DWS-1008 switches,

170DWS-1008 CLI Reference Guide D-Link Systems, Inc.Access Point Commandsset dap fingerprintConfirms an DWL-8220AP’s fingerprint on a switch. If DWL-8220

171DWS-1008 CLI Reference Guide D-Link Systems, Inc.Access Point Commandsdapauto Configures a DWL-8220AP group for the DWL-8220AP configuration

172DWS-1008 CLI Reference Guide D-Link Systems, Inc.Access Point CommandsExamples: The following command changes the name of the DWL-8220AP access p

173DWS-1008 CLI Reference Guide D-Link Systems, Inc.Access Point Commandsap port-list List of ports connected to the DWL-8220AP access points on

174DWS-1008 CLI Reference Guide D-Link Systems, Inc.Access Point Commandsradio 1 Radio 1 of the DWL-8220AP. radio 2 Radio 2 of the DWL-8220AP.

175DWS-1008 CLI Reference Guide D-Link Systems, Inc.Access Point Commandsset {ap | dap} radio channel Sets an DWL-8220AP radio’s channel. Syntax: se

176DWS-1008 CLI Reference Guide D-Link Systems, Inc.Access Point Commandsap port-list List of ports connected to the DWL-8220AP access points on wh

177DWS-1008 CLI Reference Guide D-Link Systems, Inc.Access Point Commandsdapauto Sets the radio mode for DWL-8220APs managed by the DWL-8220AP

178DWS-1008 CLI Reference Guide D-Link Systems, Inc.Access Point Commands mode enable Enables radios on the specified ports with the parameter

17DWS-1008 CLI Reference Guide D-Link Systems, Inc.System Services CommandsExamples: To set the number of lines displayed to 100, type the following c

179DWS-1008 CLI Reference Guide D-Link Systems, Inc.Access Point CommandsAccess: EnabledUsage: You also can configure a radio’s channel on the same

180DWS-1008 CLI Reference Guide D-Link Systems, Inc.Access Point CommandsUsage: This parameter applies to all Distributed APs managed by the switch.

181DWS-1008 CLI Reference Guide D-Link Systems, Inc.Access Point Commandsenable Configures radios to allow associations with 802.11g clients only. dis

182DWS-1008 CLI Reference Guide D-Link Systems, Inc.Access Point CommandsUsage: You can enter this command on any DWS-1008 switch. The command takes

183DWS-1008 CLI Reference Guide D-Link Systems, Inc.Access Point Commandsrate Minimum number of seconds a radio must remain on its current channel

184DWS-1008 CLI Reference Guide D-Link Systems, Inc.Access Point Commandsset radio-profile auto-tune power-backoff-timer Sets the interval at which rad

185DWS-1008 CLI Reference Guide D-Link Systems, Inc.Access Point Commands When RF Auto-Tuning for power is enabled, MSS does not allow you to

186DWS-1008 CLI Reference Guide D-Link Systems, Inc.Access Point CommandsDefaults: The beacon interval for DWL-8220AP radios is 100 ms by default. A

187DWS-1008 CLI Reference Guide D-Link Systems, Inc.Access Point Commandsset radio-profile dtim-interval Changes the number of times after every beacon

188DWS-1008 CLI Reference Guide D-Link Systems, Inc.Access Point CommandsUsage: You must disable all radios that are using a radio profile before you

18DWS-1008 CLI Reference Guide D-Link Systems, Inc.System Services Commandsset system contactStores a contact name for the DWS-1008 switch.Syntax: set

189DWS-1008 CLI Reference Guide D-Link Systems, Inc.Access Point CommandsAccess: Enabled Usage: You must disable all radios that are using a radio

190DWS-1008 CLI Reference Guide D-Link Systems, Inc.Access Point Commandsmode enable Enables the radios that use this profile. mode disable Disable

191DWS-1008 CLI Reference Guide D-Link Systems, Inc.Access Point Commandsname Radio profile name. long Advertises support for long preambles

192DWS-1008 CLI Reference Guide D-Link Systems, Inc.Access Point CommandsUsage: You must disable all radios that are using a radio profile before you

193DWS-1008 CLI Reference Guide D-Link Systems, Inc.Access Point CommandsDefaults: The default short unicast retry threshold for DWL-8220AP radios i

194DWS-1008 CLI Reference Guide D-Link Systems, Inc.Access Point CommandsSyntax: set service-profile name auth-dot1x {enable | disable} name Ser

195DWS-1008 CLI Reference Guide D-Link Systems, Inc.Access Point Commandsnone Denies authentication and prohibits the user from accessing the SSID.

196DWS-1008 CLI Reference Guide D-Link Systems, Inc.Access Point Commandsset service-profile beacon Disables or reenables beaconing of the SSID

197DWS-1008 CLI Reference Guide D-Link Systems, Inc.Access Point Commandsset service-profile cipher-tkip Disables or reenables Temporal Key Integrity P

198DWS-1008 CLI Reference Guide D-Link Systems, Inc.Access Point CommandsExamples: The following command configures service profile sp2 to use 104-bit

1DWS-1008 CLI Reference Guide D-Link Systems, Inc.Table of ContentsUsing the Command Line Interface ...

19DWS-1008 CLI Reference Guide D-Link Systems, Inc.System Services Commandsset system countrycode (continued)Defaults: The factory default country cod

199DWS-1008 CLI Reference Guide D-Link Systems, Inc.Access Point Commandsset service-profile psk-phrase Configures a passphrase for preshared key (PSK)

200DWS-1008 CLI Reference Guide D-Link Systems, Inc.Access Point Commands configuration. The binary number is never displayed in the configuration.

201DWS-1008 CLI Reference Guide D-Link Systems, Inc.Access Point Commandsset service-profile ssid-nameConfigures the SSID name in a service profile. Synt

202DWS-1008 CLI Reference Guide D-Link Systems, Inc.Access Point Commandsset service-profile tkip-mc-time Changes the length of time that DWL-8220AP ra

203DWS-1008 CLI Reference Guide D-Link Systems, Inc.Access Point CommandsExamples: The following command configures service profile sp2 to use WEP key

204DWS-1008 CLI Reference Guide D-Link Systems, Inc.Access Point CommandsDefaults: By default, no static WEP keys are defined. Access: Enabled Usag

205DWS-1008 CLI Reference Guide D-Link Systems, Inc.Access Point Commandsport-list List of ports connected to the DWL-8220AP access point(s) for whic

206DWS-1008 CLI Reference Guide D-Link Systems, Inc.Access Point CommandsDAP Connection ID for the Distributed AP. Note: This field is a

207DWS-1008 CLI Reference Guide D-Link Systems, Inc.Access Point Commandsauto-tune min-client-rate Minimum data rate the radio must maintain for asso

208DWS-1008 CLI Reference Guide D-Link Systems, Inc.Access Point CommandsDWS-1008# show ap counters 7Port: 7 radio: 1 ==================

20DWS-1008 CLI Reference Guide D-Link Systems, Inc.System Services Commandsset system locationStores location information for the DWS-1008 switch.Synt

209DWS-1008 CLI Reference Guide D-Link Systems, Inc.Access Point CommandsCCMP Pkt Decrypt Err Number of times a decryption error occurred with a pac

210DWS-1008 CLI Reference Guide D-Link Systems, Inc.Access Point Commandsshow ap dual-homeThis command is deprecated in MSS Version 2.0. To display th

211DWS-1008 CLI Reference Guide D-Link Systems, Inc.Access Point CommandsField Description CoS CoS value associated with the forwarding que

212DWS-1008 CLI Reference Guide D-Link Systems, Inc.Access Point CommandsRxMulticast: 21798 TxSingleColl: 32RxBroadcast:

213DWS-1008 CLI Reference Guide D-Link Systems, Inc.Access Point CommandsTxUnderruns Number of frames that were not transmitted or retransmitted

214DWS-1008 CLI Reference Guide D-Link Systems, Inc.Access Point Commandsshow {ap | dap} statusDisplays DWL-8220AP access point and radio status infor

215DWS-1008 CLI Reference Guide D-Link Systems, Inc.Access Point CommandsThe following command displays the status of a directly connected DWL-8220AP

216DWS-1008 CLI Reference Guide D-Link Systems, Inc.Access Point CommandsField Description ----------------------------------------------------------

217DWS-1008 CLI Reference Guide D-Link Systems, Inc.Access Point Commands-----------------------------------------------------------------------------

218DWS-1008 CLI Reference Guide D-Link Systems, Inc.Access Point Commandsshow auto-tune attributes Displays the current values of the RF attributes RF

21DWS-1008 CLI Reference Guide D-Link Systems, Inc.System Services Commandsshow banner motdShows the banner that was configured with the set banner mot

219DWS-1008 CLI Reference Guide D-Link Systems, Inc.Access Point CommandsPacket Retransmission Number of retransmitted packets sent from the client C

220DWS-1008 CLI Reference Guide D-Link Systems, Inc.Access Point Commandsshow auto-tune neighborsDisplays the other D-Link radios and third-party 802.

221DWS-1008 CLI Reference Guide D-Link Systems, Inc.Access Point CommandsField Description --------------------------------------------------------

222DWS-1008 CLI Reference Guide D-Link Systems, Inc.Access Point CommandsAP with serial ID 223344: DWS-1008# show dap connection serial-id 223344 Tota

223DWS-1008 CLI Reference Guide D-Link Systems, Inc.Access Point CommandsDWS-1008# show dap global Total number of entries: 8 DAP Serial Id Swit

224DWS-1008 CLI Reference Guide D-Link Systems, Inc.Access Point CommandsUsage: This command also displays an DWL-8220AP that is directly connected

225DWS-1008 CLI Reference Guide D-Link Systems, Inc.Access Point Commandsshow radio-profileDisplays radio profile information. Syntax: show radio-pr

226DWS-1008 CLI Reference Guide D-Link Systems, Inc.Access Point CommandsRTS Threshold Minimum length (in bytes) a frame can be for a radio in the ra

227DWS-1008 CLI Reference Guide D-Link Systems, Inc.Access Point CommandsClient Backoff Timer Interval, in minutes, at which radios in a radio profil

228DWS-1008 CLI Reference Guide D-Link Systems, Inc.Access Point CommandsField Description ----------------------------------------------------------

22DWS-1008 CLI Reference Guide D-Link Systems, Inc.System Services CommandsThe table below describes the fields of show system output.Field

229DWS-1008 CLI Reference Guide D-Link Systems, Inc.Access Point CommandsShared Key Auth Indicates whether shared-key authentication is enabled. -

230DWS-1008 CLI Reference Guide D-Link Systems, Inc.STP CommandsSTP CommandsUse Spanning Tree Protocol (STP) commands to configure and manage sp

231DWS-1008 CLI Reference Guide D-Link Systems, Inc.STP CommandsExamples: The following command resets the STP priority on port 9 to the default:DW

232DWS-1008 CLI Reference Guide D-Link Systems, Inc.STP CommandsDefaults: None.Access: Enabled.Usage: MSS does not change a port’s priority for VLANs

233DWS-1008 CLI Reference Guide D-Link Systems, Inc.STP Commandsvlan vlan-id VLAN name or number. MSS enables or disables STP on only the specified VLA

234DWS-1008 CLI Reference Guide D-Link Systems, Inc.STP Commandsset spantree fwddelayChanges the period of time after a topology change that a switch

235DWS-1008 CLI Reference Guide D-Link Systems, Inc.STP CommandsDWS-1008# set spantree hello 4 allsuccess: change accepted.set spantree maxageChanges

236DWS-1008 CLI Reference Guide D-Link Systems, Inc.STP Commands SNMP Port Path Cost Defaults: Port Speed Link Type Default Port Path Cost100 Mbps

237DWS-1008 CLI Reference Guide D-Link Systems, Inc.STP Commandsset spantree portpriChanges the STP priority of a network port or ports for selection

238DWS-1008 CLI Reference Guide D-Link Systems, Inc.STP CommandsAccess: Enabled.Examples: The following command changes the cost on ports 3 and 4 to

23DWS-1008 CLI Reference Guide D-Link Systems, Inc.System Services CommandsField Description---------------------------------------------

239DWS-1008 CLI Reference Guide D-Link Systems, Inc.STP Commandsvlan vlan-id VLAN name or number. MSS changes the bridge priority on only the specified

240DWS-1008 CLI Reference Guide D-Link Systems, Inc.STP Commandsvlan vlan-id VLAN name or number. If you do not specify a VLAN, MSS displays STP infor

241DWS-1008 CLI Reference Guide D-Link Systems, Inc.STP Commands Output for show spantree Field DescriptionVLAN VLAN number.Spanning tree mode In

242DWS-1008 CLI Reference Guide D-Link Systems, Inc.STP CommandsPort-State STP state of the port:• Blocking - The port is not forwarding Layer 2 traf

243DWS-1008 CLI Reference Guide D-Link Systems, Inc.STP Commandsvlan vlan-id VLAN name or number. If you do not specify a VLAN, MSS displays informati

244DWS-1008 CLI Reference Guide D-Link Systems, Inc.STP CommandsDWS-1008# show spantree portfastPort Vlan Portfast-------------

245DWS-1008 CLI Reference Guide D-Link Systems, Inc.STP Commandsport-list List of ports. If you do not specify any ports, MSS displays STP statistics

246DWS-1008 CLI Reference Guide D-Link Systems, Inc.STP Commands Status of Port Timersforward delay timer INACTIVEforw

247DWS-1008 CLI Reference Guide D-Link Systems, Inc.STP Commands Output for show spantree statistics Field DescriptionPort Port number.VLAN VLAN I

248DWS-1008 CLI Reference Guide D-Link Systems, Inc.STP Commandstop_change_ack Value of the topology change acknowledgment flag in the next configured b

24DWS-1008 CLI Reference Guide D-Link Systems, Inc.Port CommandsUse port commands to configure and manage individual ports and load-sharing port groups

249DWS-1008 CLI Reference Guide D-Link Systems, Inc.STP Commandstopology change timer Status of the topology change timer. This timer determines the t

250DWS-1008 CLI Reference Guide D-Link Systems, Inc.STP Commandstopology change time Time period, in seconds, during which BPDUs are transmitted with

251DWS-1008 CLI Reference Guide D-Link Systems, Inc.STP Commandsshow spantree uplinkfastDisplays uplink fast convergence information for one VLAN or a

252DWS-1008 CLI Reference Guide D-Link Systems, Inc.IGMP Snooping CommandsIGMP Snooping CommandsUse Internet Group Management Protocol (IGMP) snooping

253DWS-1008 CLI Reference Guide D-Link Systems, Inc.IGMP Snooping CommandsDWS-1008# set igmp disable vlan orangesuccess: change accepted.set igmp lmqi

254DWS-1008 CLI Reference Guide D-Link Systems, Inc.IGMP Snooping CommandsenableAdds the port to the list of static multicast router ports.disableRemo

255DWS-1008 CLI Reference Guide D-Link Systems, Inc.IGMP Snooping Commandsset igmp mrsol mrsiChanges the interval between multicast router solicitatio

256DWS-1008 CLI Reference Guide D-Link Systems, Inc.IGMP Snooping CommandsExamples: The following command changes the other-querier-present interval

257DWS-1008 CLI Reference Guide D-Link Systems, Inc.IGMP Snooping Commandsvlan vlan-id VLAN name or number. If you do not specify a VLAN, the timer ch

258DWS-1008 CLI Reference Guide D-Link Systems, Inc.IGMP Snooping Commandsset igmp querierEnables or disables the IGMP pseudo-querier on a switch, on

25DWS-1008 CLI Reference Guide D-Link Systems, Inc.Port Commandsname name Name of the port group.Defaults: None.Access: Enabled.Examples: The foll

259DWS-1008 CLI Reference Guide D-Link Systems, Inc.IGMP Snooping CommandsAccess: Enabled.Usage: You cannot add DWL-8200AP access ports or wired aut

260DWS-1008 CLI Reference Guide D-Link Systems, Inc.IGMP Snooping CommandsSyntax: show igmp [vlan vlan-id]vlan vlan-id VLAN name or number. If you d

261DWS-1008 CLI Reference Guide D-Link Systems, Inc.IGMP Snooping CommandsMrouter-Term 0 0 0Mrouter-Sol

262DWS-1008 CLI Reference Guide D-Link Systems, Inc.IGMP Snooping CommandsType How the switch learned that the port is a multicast router port:• conf

263DWS-1008 CLI Reference Guide D-Link Systems, Inc.IGMP Snooping CommandsTTL Number of seconds before this entry ages out if the switch does not rece

264DWS-1008 CLI Reference Guide D-Link Systems, Inc.IGMP Snooping Commands Output for show igmp mrouter Field DescriptionMulticast routers for vla

265DWS-1008 CLI Reference Guide D-Link Systems, Inc.IGMP Snooping CommandsDWS-1008# show igmp querier vlan orangeQuerier for vlan orangePort Querier-I

266DWS-1008 CLI Reference Guide D-Link Systems, Inc.IGMP Snooping CommandsSyntax: show igmp receiver-table [vlan vlan-id] [group group-ip-addr/mask-l

267DWS-1008 CLI Reference Guide D-Link Systems, Inc.IGMP Snooping Commands Output for show igmp receiver-table Field DescriptionVLAN VLAN that con

268DWS-1008 CLI Reference Guide D-Link Systems, Inc.IGMP Snooping CommandsLeave 0 0 0Mrouter-Adv

26DWS-1008 CLI Reference Guide D-Link Systems, Inc.Port CommandsPort Parameter Setting-------------------------------------------------------

269DWS-1008 CLI Reference Guide D-Link Systems, Inc.IGMP Snooping CommandsIGMP message type Type of IGMP message, continued:• Mrouter-Term - Multicas

270DWS-1008 CLI Reference Guide D-Link Systems, Inc.Security ACL CommandsUse security ACL commands to configure and monitor security access control lis

271DWS-1008 CLI Reference Guide D-Link Systems, Inc.Security ACL CommandsDWS-1008# show security acl info all ACL information for all set security acl

272DWS-1008 CLI Reference Guide D-Link Systems, Inc.Security ACL Commandsvlan vlan-id VLAN name or number. MSS removes the security ACL from the

273DWS-1008 CLI Reference Guide D-Link Systems, Inc.Security ACL CommandsSyntax: commit security acl {acl-name | all} acl-name Name of an existing

274DWS-1008 CLI Reference Guide D-Link Systems, Inc.Security ACL CommandsSyntax: hit-sample-rate seconds seconds Number of seconds between samp

275DWS-1008 CLI Reference Guide D-Link Systems, Inc.Security ACL CommandsSyntax: rollback security acl {acl-name | all} acl-name Name of an existin

276DWS-1008 CLI Reference Guide D-Link Systems, Inc.Security ACL CommandsSyntax: By IP packetsset security acl ip acl-name {permit [cos cos] |

277DWS-1008 CLI Reference Guide D-Link Systems, Inc.Security ACL Commands• 4 or 5 - Video. Packets are queued in DWL-8220AP forwarding queue

278DWS-1008 CLI Reference Guide D-Link Systems, Inc.Security ACL Commandscode icmp-code For ICMP messages filtered by type, additionally filters ICMP

27DWS-1008 CLI Reference Guide D-Link Systems, Inc.Port Commandsmonitor port counters (continued)Defaults: All types of statistics are displayed for a

279DWS-1008 CLI Reference Guide D-Link Systems, Inc.Security ACL CommandsYou cannot perform ACL functions that include permitting, denying, o

280DWS-1008 CLI Reference Guide D-Link Systems, Inc.Security ACL Commandsset security acl map Assigns a committed security ACL to a VLAN, physical p

281DWS-1008 CLI Reference Guide D-Link Systems, Inc.Security ACL CommandsExamples: The following command maps security ACL acl_133 to port 4

282DWS-1008 CLI Reference Guide D-Link Systems, Inc.Security ACL Commandsshow security acl dscp Displays a table that maps Differentiated Services

283DWS-1008 CLI Reference Guide D-Link Systems, Inc.Security ACL CommandsAccess: EnabledUsage: For MSS to count hits for a security ACL, you must spec

284DWS-1008 CLI Reference Guide D-Link Systems, Inc.Security ACL Commandsset security acl ip acl_123 (hits #5 462) -----------------------------------

285DWS-1008 CLI Reference Guide D-Link Systems, Inc.Security ACL Commandsshow security acl resource-usage Displays statistics about the resourc

286DWS-1008 CLI Reference Guide D-Link Systems, Inc.Security ACL Commands In mapping : True No VLAN or PORT mapping : False No VPORT mapping :

287DWS-1008 CLI Reference Guide D-Link Systems, Inc.Security ACL Commandsshow security acl resource-usage Output (continued)--------------------------

288DWS-1008 CLI Reference Guide D-Link Systems, Inc.Security ACL Commandsshow security acl resource-usage Output (continued)--------------------------

28DWS-1008 CLI Reference Guide D-Link Systems, Inc.Port CommandsPort Status Rx Octets Tx Octets===============================================

289DWS-1008 CLI Reference Guide D-Link Systems, Inc.Cryptography CommandsUse cryptography commands to configure and manage certificates and public-priva

290DWS-1008 CLI Reference Guide D-Link Systems, Inc.Cryptography Commands3. When MSS prompts you for the PEM-formatted certificate, paste the P

291DWS-1008 CLI Reference Guide D-Link Systems, Inc.Cryptography CommandsThe switch verifies the validity of the public key associated with this certifi

292DWS-1008 CLI Reference Guide D-Link Systems, Inc.Cryptography Commandscrypto generate request Generates a Certificate Signing Request (CSR). This

293DWS-1008 CLI Reference Guide D-Link Systems, Inc.Cryptography CommandsDefaults: None Access: EnabledUsage: To use this command, you must alr

294DWS-1008 CLI Reference Guide D-Link Systems, Inc.Cryptography Commandscrypto generate self-signed Generates a self-signed certificate for either a

295DWS-1008 CLI Reference Guide D-Link Systems, Inc.Cryptography Commandscrypto otp Sets a one-time password (OTP) for use with the crypto pkcs12 c

296DWS-1008 CLI Reference Guide D-Link Systems, Inc.Cryptography Commandscrypto pkcs12 Unpacks a PKCS #12 object file into the certificate an

297DWS-1008 CLI Reference Guide D-Link Systems, Inc.Cryptography Commandsshow crypto ca-certificate Displays information about the certificate authori

298DWS-1008 CLI Reference Guide D-Link Systems, Inc.Cryptography Commandsshow crypto certificate Displays information about one of the cryptographic

2DWS-1008 CLI Reference Guide D-Link Systems, Inc.Using the Command Line InterfaceCLI ConventionsCommand PromptsBy default, the MSS CLI provides the f

29DWS-1008 CLI Reference Guide D-Link Systems, Inc.Port CommandsStatistics Option Field Descriptionreceive-errors Rx Crc

299DWS-1008 CLI Reference Guide D-Link Systems, Inc.Cryptography Commandsshow crypto key ssh Displays SSH authentication key information. This com

300DWS-1008 CLI Reference Guide D-Link Systems, Inc.Cryptography CommandsNotes

301DWS-1008 CLI Reference Guide D-Link Systems, Inc.RADIUS CommandsUse RADIUS commands to set up communication between an switch and groups o

302DWS-1008 CLI Reference Guide D-Link Systems, Inc.RADIUS CommandsDWS-1008# clear radius retransmitsuccess: change accepted.DWS-1008# clear radius ti

303DWS-1008 CLI Reference Guide D-Link Systems, Inc.RADIUS CommandsSyntax: clear radius proxy port allDefaults: None. Access: Enabled.Examples: Th

304DWS-1008 CLI Reference Guide D-Link Systems, Inc.RADIUS CommandsExamples: To remove the server group sg-77 type the following command:DWS-1008# cl

305DWS-1008 CLI Reference Guide D-Link Systems, Inc.RADIUS CommandsUsage: You can specify only one parameter per command line. Examples: The fol

306DWS-1008 CLI Reference Guide D-Link Systems, Inc.RADIUS Commands[acct-port acct-udp-port-number] [port udp-port-number] key stringaddress ipaddress

307DWS-1008 CLI Reference Guide D-Link Systems, Inc.RADIUS CommandsAccess: Enabled.Usage: AAA for third-party AP users has additional configuration r

308DWS-1008 CLI Reference Guide D-Link Systems, Inc.RADIUS Commandskey string Password (shared secret key) the switch uses to authenticate to the RADI

30DWS-1008 CLI Reference Guide D-Link Systems, Inc.Port CommandsStatistics Option Field Descriptiontransmit-etherstats Tx 64

309DWS-1008 CLI Reference Guide D-Link Systems, Inc.RADIUS Commandsset server groupConfigures a group of one to four RADIUS servers.Syntax: set server

310DWS-1008 CLI Reference Guide D-Link Systems, Inc.RADIUS CommandsDefaults: Load balancing is disabled by default.Access: Enabled.Usage: You can

311DWS-1008 CLI Reference Guide D-Link Systems, Inc.802.1x Management Commands802.1X Management CommandsUse 802. IEEE X management commands to modify

312DWS-1008 CLI Reference Guide D-Link Systems, Inc.802.1x Management Commands clear dot1x port-controlResets all wired authentication ports on the sw

313DWS-1008 CLI Reference Guide D-Link Systems, Inc.802.1x Management CommandsExamples: Type the following command to reset the maximum number of

314DWS-1008 CLI Reference Guide D-Link Systems, Inc.802.1x Management CommandsSyntax: clear dot1x timeout supplicantDefaults: The default for

315DWS-1008 CLI Reference Guide D-Link Systems, Inc.802.1x Management CommandsAccess: Enabled.Usage: This command applies only to wired authen

316DWS-1008 CLI Reference Guide D-Link Systems, Inc.802.1x Management Commandsset dot1x key-txEnables or disables the transmission of encryption key i

317DWS-1008 CLI Reference Guide D-Link Systems, Inc.802.1x Management Commandsset dot1x port-controlDetermines the 802.1X authentication behavior on i

318DWS-1008 CLI Reference Guide D-Link Systems, Inc.802.1x Management CommandsExamples: Type the following command to set the quiet period to 90 s

31DWS-1008 CLI Reference Guide D-Link Systems, Inc.Port Commandsset dap (continued)Syntax: set dap dap-num serial-id serial-ID model {dwl-8220ap}[radi

319DWS-1008 CLI Reference Guide D-Link Systems, Inc.802.1x Management Commandsset dot1x reauth-periodSets the number of seconds that must elapse befor

320DWS-1008 CLI Reference Guide D-Link Systems, Inc.802.1x Management CommandsSyntax: set dot1x timeout supplicant secondsseconds Specify a value

321DWS-1008 CLI Reference Guide D-Link Systems, Inc.802.1x Management CommandsDefaults: WEP key rotation is enabled, by default.Access: Enable

322DWS-1008 CLI Reference Guide D-Link Systems, Inc.802.1x Management CommandsDefaults: None.Access: Enabled.Examples: Type the following

323DWS-1008 CLI Reference Guide D-Link Systems, Inc.802.1x Management CommandsType the following command to display 802.1X statistics:DWS-1008# show d

324DWS-1008 CLI Reference Guide D-Link Systems, Inc.802.1x Management CommandsStarts While AuthenticatingNumber of times that the switch state wildcar

325DWS-1008 CLI Reference Guide D-Link Systems, Inc.Session Management CommandsSession Management CommandsUse session management commands to display a

326DWS-1008 CLI Reference Guide D-Link Systems, Inc.Session Management CommandsTo clear Telnet client session 0, type the following command:DWS-1008#

327DWS-1008 CLI Reference Guide D-Link Systems, Inc.Session Management CommandsExamples: To clear all sessions for MAC address 00:01:02:03:04:05, typ

328DWS-1008 CLI Reference Guide D-Link Systems, Inc.Session Management CommandsExamples: To view information about sessions of administrative user

32DWS-1008 CLI Reference Guide D-Link Systems, Inc.Port Commandsset portAdministratively disables or reenables a port.Syntax: set port {enable | disab

329DWS-1008 CLI Reference Guide D-Link Systems, Inc.Session Management Commands show sessions telnet client Output Field DescriptionSession Sessio

330DWS-1008 CLI Reference Guide D-Link Systems, Inc.Session Management Commandsvlan vlan-glob Displays all network sessions on a single VLAN or a set

331DWS-1008 CLI Reference Guide D-Link Systems, Inc.Session Management CommandsThe following command displays summary information about the sessions f

332DWS-1008 CLI Reference Guide D-Link Systems, Inc.Session Management Commands(Additional show sessions network verbose Ou describes the additional

333DWS-1008 CLI Reference Guide D-Link Systems, Inc.Session Management Commands Additional show sessions network verbose Output Field DescriptionCli

334DWS-1008 CLI Reference Guide D-Link Systems, Inc.Session Management CommandsState Status of the session:• AUTH, ASSOC REQ—Client is being associ

335DWS-1008 CLI Reference Guide D-Link Systems, Inc.Session Management CommandsUnicast bytes in Total number of unicast bytes received from the user b

336DWS-1008 CLI Reference Guide D-Link Systems, Inc.RF Detection CommandsRF Detection CommandsMSS automatically performs RF detection scans on enabled

337DWS-1008 CLI Reference Guide D-Link Systems, Inc.RF Detection Commandsclear rfdetect ignoreRemoves a device from the ignore list for RF scans. MSS

338DWS-1008 CLI Reference Guide D-Link Systems, Inc.RF Detection CommandsExamples: The following command removes client OUI aa:bb:cc:00:00:00 from

33DWS-1008 CLI Reference Guide D-Link Systems, Inc.Port Commandsset port-groupUsage: You can configure up to 16 ports in a port group, in any combinati

339DWS-1008 CLI Reference Guide D-Link Systems, Inc.RF Detection Commandsset rfdetect ignoreConfigures a list of known devices to ignore during an RF s

340DWS-1008 CLI Reference Guide D-Link Systems, Inc.RF Detection Commandsset rfdetect signatureEnables AP signatures. An AP signature is a set of bits

341DWS-1008 CLI Reference Guide D-Link Systems, Inc.RF Detection CommandsAP or client vendors that are allowed on the network. MSS does not list a dev

342DWS-1008 CLI Reference Guide D-Link Systems, Inc.RF Detection CommandsTotal number of entries: 1 Blacklist MAC Type Port TTL--------

343DWS-1008 CLI Reference Guide D-Link Systems, Inc.RF Detection Commandsshow rfdetect clients Output Field DescriptionClient MAC MAC address of the

344DWS-1008 CLI Reference Guide D-Link Systems, Inc.RF Detection CommandsTyp Classification of the rogue device:• rogue - Wireless device that is on t

345DWS-1008 CLI Reference Guide D-Link Systems, Inc.RF Detection Commands802.11 reassociation flood 0

346DWS-1008 CLI Reference Guide D-Link Systems, Inc.RF Detection Commandsshow rfdetect data Output Field DescriptionBSSID MAC address of the SSID us

347DWS-1008 CLI Reference Guide D-Link Systems, Inc.RF Detection CommandsExamples: The following example displays the list of ignored devices:DWS-100

348DWS-1008 CLI Reference Guide D-Link Systems, Inc.RF Detection Commandsshow rfdetect vendor-listDisplays the entries in the permitted vendor list.Sy

34DWS-1008 CLI Reference Guide D-Link Systems, Inc.Port Commandsset port negotiationDisables or reenables autonegotiation on gigabit Ethernet or 10/10

349DWS-1008 CLI Reference Guide D-Link Systems, Inc.RF Detection CommandsUsage: If a D-Link radio is supporting more than one SSID, each of the

350DWS-1008 CLI Reference Guide D-Link Systems, Inc.RF Detection CommandsFlags Classification and encryption information for the rogue:• The i, a, or

351DWS-1008 CLI Reference Guide D-Link Systems, Inc.File Management CommandsFile Management CommandsUse file management commands to manage system files

352DWS-1008 CLI Reference Guide D-Link Systems, Inc.File Management CommandsThe backup command places the boot configuration file into the arc

353DWS-1008 CLI Reference Guide D-Link Systems, Inc.File Management CommandsSyntax: copy source-url destination-urlsource-url Name and location of

354DWS-1008 CLI Reference Guide D-Link Systems, Inc.File Management CommandsExamples: The following command copies a file called floor from nonvolatile

355DWS-1008 CLI Reference Guide D-Link Systems, Inc.File Management CommandsDWS-1008# copy testconfig tftp://10.1.1.1/testconfigsuccess: sent 365 bytes

356DWS-1008 CLI Reference Guide D-Link Systems, Inc.File Management CommandsThe following command displays the files in the old subdirectory:DWS-1008#

357DWS-1008 CLI Reference Guide D-Link Systems, Inc.File Management CommandsDefaults: If you do not specify a filename, MSS uses the same configuration

358DWS-1008 CLI Reference Guide D-Link Systems, Inc.File Management CommandsDWS-1008# dir=============================================================

35DWS-1008 CLI Reference Guide D-Link Systems, Inc.Port Commandsset port poe (continued)Defaults: PoE is disabled on network and wired authentication

359DWS-1008 CLI Reference Guide D-Link Systems, Inc.File Management CommandsDWS-1008# reset systemThis will reset the entire system. Are you sure (y/n

360DWS-1008 CLI Reference Guide D-Link Systems, Inc.File Management CommandsUsage: The backup command stores the MAC address of the switch in the a

361DWS-1008 CLI Reference Guide D-Link Systems, Inc.File Management CommandsDefaults: By default, MSS saves the running configuration as the configurat

362DWS-1008 CLI Reference Guide D-Link Systems, Inc.File Management Commandsset boot partitionSpecifies the boot partition in which to look for the sys

363DWS-1008 CLI Reference Guide D-Link Systems, Inc.File Management CommandsThe table below describes the fields in the show boot output.Output for sho

364DWS-1008 CLI Reference Guide D-Link Systems, Inc.File Management Commandsarea area Configuration area. You can specify one of the following:• aaa

365DWS-1008 CLI Reference Guide D-Link Systems, Inc.File Management CommandsExamples: The following command shows configuration information for VLANs

366DWS-1008 CLI Reference Guide D-Link Systems, Inc.File Management CommandsThe following command displays additional software build information and D

367DWS-1008 CLI Reference Guide D-Link Systems, Inc.File Management CommandsPort/DAP Port number connected to a DWL-8220AP access point.AP Model AP m

368DWS-1008 CLI Reference Guide D-Link Systems, Inc.Trace CommandsTrace CommandsUse trace commands to perform diagnostic routines. While MSS allows y

36DWS-1008 CLI Reference Guide D-Link Systems, Inc.Port Commandsset port trapEnables or disables Simple Network Management Protocol (SNMP) linkup

369DWS-1008 CLI Reference Guide D-Link Systems, Inc.Trace CommandsTo clear the session manager trace, type the following command:DWS-1008# clear trace

370DWS-1008 CLI Reference Guide D-Link Systems, Inc.Trace CommandsDefaults: The default trace level is 5.Access: Enabled.Examples: The following co

371DWS-1008 CLI Reference Guide D-Link Systems, Inc.Trace Commandsset trace dot1xTraces 802.1X sessions.Syntax: set trace dot1x [mac-addr mac-addres

372DWS-1008 CLI Reference Guide D-Link Systems, Inc.Trace Commandsport port-num Traces a port number. Specify a switch port number between 1 and 8. u

373DWS-1008 CLI Reference Guide D-Link Systems, Inc.Snoop CommandsSnoop CommandsUse snoop commands to monitor wireless traffic, by using a Distributed

374DWS-1008 CLI Reference Guide D-Link Systems, Inc.Snoop Commandsset snoopConfigures a snoop filter.Syntax: set snoop filter-name [condition-list] [obs

375DWS-1008 CLI Reference Guide D-Link Systems, Inc.Snoop CommandsUsage: Traffic that matches a snoop filter is copied after it is decrypted. The dec

376DWS-1008 CLI Reference Guide D-Link Systems, Inc.Snoop CommandsAccess: Enabled.Usage: You can map the same filter to more than one radio. You ca

377DWS-1008 CLI Reference Guide D-Link Systems, Inc.Snoop Commandsshow snoopDisplays the AP radio mapping for all snoop filters.Syntax: show snoopDefa

378DWS-1008 CLI Reference Guide D-Link Systems, Inc.Snoop Commandsshow snoop mapShows the AP radios that are mapped to a specific snoop filter. Syntax:

37DWS-1008 CLI Reference Guide D-Link Systems, Inc.Port Commandsset port type ap (continued)Syntax: set port type ap port-list model dwl-8220ap poe {e

379DWS-1008 CLI Reference Guide D-Link Systems, Inc.Snoop Commands The table below describes the fields in this display. Field DescriptionFilter Nam

380DWS-1008 CLI Reference Guide D-Link Systems, Inc.System Log CommandsSystem Log CommandsUse the system log commands to record information for monito

381DWS-1008 CLI Reference Guide D-Link Systems, Inc.System Log CommandsSyntax: set log {buffer | console | current | server ip-addr | sessions | trac

382DWS-1008 CLI Reference Guide D-Link Systems, Inc.System Log Commandslocal-facility facility-levelFor messages sent to a syslog server, maps all mes

383DWS-1008 CLI Reference Guide D-Link Systems, Inc.System Log CommandsSyntax: set log trace mbytes countcount Size of the trace buffer, in megabytes

384DWS-1008 CLI Reference Guide D-Link Systems, Inc.System Log Commandsseverity severity-levelDisplays messages at a severity level greater than or eq

385DWS-1008 CLI Reference Guide D-Link Systems, Inc.System Log Commandsshow log configDisplays log configuration information.Syntax: show log configDefa

386DWS-1008 CLI Reference Guide D-Link Systems, Inc.System Log Commands+|-|/number-of-messagesDisplays the number of messages specified as follows: • A

387DWS-1008 CLI Reference Guide D-Link Systems, Inc.System Log CommandsExamples: Type the following command to see the facilities for which you can v

388DWS-1008 CLI Reference Guide D-Link Systems, Inc.Boot Prompt CommandsBoot Prompt CommandsBoot prompt commands enable you to perform basic tasks, in

38DWS-1008 CLI Reference Guide D-Link Systems, Inc.Port Commandsset port type ap (continued)The following command sets ports 4 through 6 for the DWL-8

389DWS-1008 CLI Reference Guide D-Link Systems, Inc.Boot Prompt CommandsSyntax: boot [BT=type] [DEV=device] [FN=filename] [HA=ip-addr] [FL=num] [OPT=o

390DWS-1008 CLI Reference Guide D-Link Systems, Inc.Boot Prompt CommandsExamples: The following command loads system image file 010101.020 from boot

391DWS-1008 CLI Reference Guide D-Link Systems, Inc.Boot Prompt CommandsExamples: The following command enters the configuration mode for the currentl

392DWS-1008 CLI Reference Guide D-Link Systems, Inc.Boot Prompt CommandsdeleteRemoves the currently active boot profile.Syntax: deleteDefaults: None.

393DWS-1008 CLI Reference Guide D-Link Systems, Inc.Boot Prompt CommandsSyntax: dir [c: | d: | e: | f: | boot0 | boot1]c:Nonvolatile storage area con

394DWS-1008 CLI Reference Guide D-Link Systems, Inc.Boot Prompt Commandsf:Secondary partition of the flash card in the flash card slot.boot0:Boot partit

395DWS-1008 CLI Reference Guide D-Link Systems, Inc.Boot Prompt CommandslsDisplays a list of the boot prompt commands. Syntax: lsDefaults: None.Acce

396DWS-1008 CLI Reference Guide D-Link Systems, Inc.Boot Prompt CommandsExamples: To activate the boot profile in the next slot and display the profile

397DWS-1008 CLI Reference Guide D-Link Systems, Inc.Boot Prompt CommandsshowDisplays the currently active boot profile. A boot profile is a set of param

398DWS-1008 CLI Reference Guide D-Link Systems, Inc.Boot Prompt Commands Output for show Field DescriptionBOOT Index Boot profile slot, which can be

3DWS-1008 CLI Reference Guide D-Link Systems, Inc.Using the Command Line InterfaceText Entry Conventions and Allowed CharactersUnless otherwise indica

39DWS-1008 CLI Reference Guide D-Link Systems, Inc.Port Commandsset port type wired-auth (continued)Defaults: The default tag-list is null (no tag val

399DWS-1008 CLI Reference Guide D-Link Systems, Inc.Boot Prompt CommandsExamples: The following command displays the current setting of the poweron t

400DWS-1008 CLI Reference Guide D-Link Systems, Inc.WarrantySubject to the terms and conditions set forth herein, D-Link Systems, Inc. (“D-Link”) prov

401DWS-1008 CLI Reference Guide D-Link Systems, Inc.Except as otherwise agreed by D-Link in writing, the replacement Software is provided only to the

402DWS-1008 CLI Reference Guide D-Link Systems, Inc.D-Link may reject or return any product that is not packaged and shipped in strict compliance with

403DWS-1008 CLI Reference Guide D-Link Systems, Inc.Limitation of Liability:TO THE MAXIMUM EXTENT PERMITTED BY LAW, D-LINK IS NOT LIABLE UNDER ANY CON

404DWS-1008 CLI Reference Guide D-Link Systems, Inc.FCC Statement: This equipment has been tested and found to comply with the limits for a Class B di

405DWS-1008 CLI Reference Guide D-Link Systems, Inc.RegistrationRegistrationRevised: April 4, 2006 Version 1.1Product registration is entirely volunta

40DWS-1008 CLI Reference Guide D-Link Systems, Inc.Port Commandsshow port countersDisplays port statistics.Syntax: show port counters [octets | packet

41DWS-1008 CLI Reference Guide D-Link Systems, Inc.Port Commandsshow port-groupDisplays port group information.Syntax: show port-group [all | name gro

42DWS-1008 CLI Reference Guide D-Link Systems, Inc.Port CommandsExamples: The following command displays PoE information for all ports on the DWS-1008

43DWS-1008 CLI Reference Guide D-Link Systems, Inc.Port CommandsExamples: The following command displays information for all ports on the DWS-1008:DWS

44DWS-1008 CLI Reference Guide D-Link Systems, Inc.VLAN CommandsUse virtual LAN (VLAN) commands to configure and manage parameters for individual port

45DWS-1008 CLI Reference Guide D-Link Systems, Inc.VLAN Commandsclear fdb (continued)Examples: The following command clears all static forwarding data

46DWS-1008 CLI Reference Guide D-Link Systems, Inc.VLAN Commandsclear vlan (continued)Usage: If you do not specify a port-list, the entire VLAN is rem

47DWS-1008 CLI Reference Guide D-Link Systems, Inc.VLAN Commandsset fdb (continued)vlan vlan-id Name or number of a VLAN of which the port is a m

48DWS-1008 CLI Reference Guide D-Link Systems, Inc.VLAN Commandsset fdb agingtime (continued)Examples: The following command changes the aging timeout

4DWS-1008 CLI Reference Guide D-Link Systems, Inc.Using the Command Line InterfaceWildcard MasksSecurity access control lists (ACLs) use source and de

49DWS-1008 CLI Reference Guide D-Link Systems, Inc.VLAN Commandsset vlan portAssigns one or more network ports to a VLAN. You also can add a

50DWS-1008 CLI Reference Guide D-Link Systems, Inc.VLAN Commandsshow fdbDisplays entries in the forwarding database.Syntax: show fdb [mac-addr-glob [v

51DWS-1008 CLI Reference Guide D-Link Systems, Inc.VLAN CommandsExamples: The following command displays all entries in the forwarding database:DWS-10

52DWS-1008 CLI Reference Guide D-Link Systems, Inc.VLAN Commandsshow fdb agingtimeDisplays the aging timeout period for forwarding database entries.Sy

53DWS-1008 CLI Reference Guide D-Link Systems, Inc.VLAN Commandsshow vlan configDisplays VLAN information.Syntax: show vlan config [vlan-id]vlan-id VL

54DWS-1008 CLI Reference Guide D-Link Systems, Inc.IP Services CommandsIP Services CommandsUse IP services commands to configure and manage IP interfac

55DWS-1008 CLI Reference Guide D-Link Systems, Inc.IP Services Commandsclear ip dns domainRemoves the default DNS domain name.Syntax: clear ip dns dom

56DWS-1008 CLI Reference Guide D-Link Systems, Inc.IP Services Commandsclear ip route (continued)ip-addr/mask-length IP address and subnet mask len

57DWS-1008 CLI Reference Guide D-Link Systems, Inc.IP Services CommandsExamples The following command removes NTP server 192.168.40.240 from

58DWS-1008 CLI Reference Guide D-Link Systems, Inc.IP Services Commandsclear snmp notify targetClears an SNMP notification target.Syntax: clear snmp no

5DWS-1008 CLI Reference Guide D-Link Systems, Inc.Using the Command Line InterfaceEXAMPLE\* All users in the Windows Domain EXAMPLE with

59DWS-1008 CLI Reference Guide D-Link Systems, Inc.IP Services Commandsclear summertimeClears the summertime setting from a DWS-1008 switch.Syntax: cl

60DWS-1008 CLI Reference Guide D-Link Systems, Inc.IP Services Commandsclear timezone (continued)Defaults: NoneAccess: EnabledExamples: To return the

61DWS-1008 CLI Reference Guide D-Link Systems, Inc.IP Services Commandsping (continued)vlan-name VLAN name to use as the ping source. MSS uses the

62DWS-1008 CLI Reference Guide D-Link Systems, Inc.IP Services Commandsset arp (continued)ip-addr IP address of the entry, in dotted decimal notat

63DWS-1008 CLI Reference Guide D-Link Systems, Inc.IP Services Commandsset interfaceConfigures an IP interface on a VLAN.Syntax: set interface vlan-id

64DWS-1008 CLI Reference Guide D-Link Systems, Inc.IP Services Commandsset interface dhcp-client (continued)Syntax: set interface vlan-id ip dhcp-clie

65DWS-1008 CLI Reference Guide D-Link Systems, Inc.IP Services Commandsset interface dhcp-server (continued)Defaults: The DHCP server is enabled by de

66DWS-1008 CLI Reference Guide D-Link Systems, Inc.IP Services Commandsset ip aliasConfigures an alias, which maps a name to an IP address. You can use

67DWS-1008 CLI Reference Guide D-Link Systems, Inc.IP Services Commandsset ip dns domain (continued)Syntax: set ip dns domain namename Domain name

68DWS-1008 CLI Reference Guide D-Link Systems, Inc.IP Services Commandsset ip dns server (continued)Examples: The following commands configure a DWS-10

6DWS-1008 CLI Reference Guide D-Link Systems, Inc.Using the Command Line InterfacePort ListsThe physical Ethernet ports on a switch can be set for con

69DWS-1008 CLI Reference Guide D-Link Systems, Inc.IP Services Commandsset ip routeAdds a static route to the IP route table.Syntax: set ip route {def

70DWS-1008 CLI Reference Guide D-Link Systems, Inc.IP Services Commandsset ip route (continued)Examples: The following command adds a default rou

71DWS-1008 CLI Reference Guide D-Link Systems, Inc.IP Services Commandsset ip sshChanges the TCP port number on which a DWS-1008 switch listens for Se

72DWS-1008 CLI Reference Guide D-Link Systems, Inc.IP Services Commandsset ip ssh serverDisables or reenables the SSH server on a DWS-1008 switch.Caut

73DWS-1008 CLI Reference Guide D-Link Systems, Inc.IP Services Commandsset ip telnetChanges the TCP port number on which a DWS-1008 switch listens for

74DWS-1008 CLI Reference Guide D-Link Systems, Inc.IP Services Commandsset ntpEnables or disables the NTP client on a DWS-1008 switch.Syntax set ntp {

75DWS-1008 CLI Reference Guide D-Link Systems, Inc.IP Services Commandsset ntp update-intervalChanges how often MSS sends queries to the NTP servers f

76DWS-1008 CLI Reference Guide D-Link Systems, Inc.IP Services Commandsset snmp community (continued)Defaults: None Access: EnabledUsage: SNMP com

77DWS-1008 CLI Reference Guide D-Link Systems, Inc.IP Services Commandsset snmp notify target (continued)target-num ID for the target. This ID i

78DWS-1008 CLI Reference Guide D-Link Systems, Inc.IP Services Commandsset snmp notify target (continued)SNMPv3 with TrapsTo configure a notification ta

7DWS-1008 CLI Reference Guide D-Link Systems, Inc.Using the Command Line InterfaceTabsThe CLI uses the Tab key for command completion. You can type th

79DWS-1008 CLI Reference Guide D-Link Systems, Inc.IP Services Commandsset snmp notify target (continued)SNMPv2c with Informstarget-num ID for

80DWS-1008 CLI Reference Guide D-Link Systems, Inc.IP Services Commandsset snmp notify target (continued)SNMPv1 with TrapsTo configure a notification ta

81DWS-1008 CLI Reference Guide D-Link Systems, Inc.IP Services Commandsset snmp profileConfigures an SNMP notification profile. A notification profile is a

82DWS-1008 CLI Reference Guide D-Link Systems, Inc.IP Services Commands• ClientDot1xFailureTraps - Generated when a client experiences an 802.1X failu

83DWS-1008 CLI Reference Guide D-Link Systems, Inc.IP Services Commandsset snmp profile (continued)• MPBootTraps - Generated when an access point boots

84DWS-1008 CLI Reference Guide D-Link Systems, Inc.IP Services Commandsset snmp profile (continued)• RFDetectDoSTraps - Generated when MSS detects a Do

85DWS-1008 CLI Reference Guide D-Link Systems, Inc.IP Services Commandsset snmp profile (continued)The following commands create notification profile snm

86DWS-1008 CLI Reference Guide D-Link Systems, Inc.IP Services Commandsset snmp protocolEnables a SNMP protocol. MSS supports SNMPv1, SNMPv2c, and SNM

87DWS-1008 CLI Reference Guide D-Link Systems, Inc.IP Services Commandsset snmp security (continued)unsecured SNMP message exchanges are not

88DWS-1008 CLI Reference Guide D-Link Systems, Inc.IP Services Commandsset snmp usm (continued)usm-username Name of the SNMPv3 user. Specif

8DWS-1008 CLI Reference Guide D-Link Systems, Inc.Using the Command Line InterfaceTo see a subset of the online help, type the command for which you w

89DWS-1008 CLI Reference Guide D-Link Systems, Inc.IP Services Commandsset snmp usm (continued)auth-type {none | md5 | sha} Specifies the authenticati

90DWS-1008 CLI Reference Guide D-Link Systems, Inc.IP Services Commandsset snmp usm (continued)encrypt-type {none | des Specifies the encryption typ

91DWS-1008 CLI Reference Guide D-Link Systems, Inc.IP Services Commandsset summertimeOffsets the real-time clock of a switch by +1 hour and returns it

92DWS-1008 CLI Reference Guide D-Link Systems, Inc.IP Services Commandsset system ip-addressConfigures the system IP address. The system IP address det

93DWS-1008 CLI Reference Guide D-Link Systems, Inc.IP Services CommandsUsage: The day of week is automatically calculated from the day you set. The ti

94DWS-1008 CLI Reference Guide D-Link Systems, Inc.IP Services Commandsshow arpDisplays the ARP table.Syntax: show arp [ip-addr]ip-addr IP address.D

95DWS-1008 CLI Reference Guide D-Link Systems, Inc.IP Services Commandsshow dhcp-clientDisplays DHCP client information for all VLANs.Syntax: show dhc

96DWS-1008 CLI Reference Guide D-Link Systems, Inc.IP Services Commandsshow dhcp-client (continued)Field DescriptionSubnet Mask Netwo

97DWS-1008 CLI Reference Guide D-Link Systems, Inc.IP Services Commandsshow dhcp-server (continued)The following command displays configuration and

98DWS-1008 CLI Reference Guide D-Link Systems, Inc.IP Services CommandsOutput for show dhcp-client verboseField DescriptionInterface