DSL-302G ADSL Ethernet/USB Modem User’s Guide First Edition (February 2002) 6DSL302G..01 Printed In Taiwan
Front Panel Place the Modem in a location that allows a view of the LED indicators. To save space you can use the feet to stand the device on eithe
LED Indicators LED Indicators The LED Indicators read as follows: Power Steady green light indicates the unit is powered on. Status Lights steady g
Hardware Installation This chapter describes the various network cable and power connections required to use the Modem. Modem Location When selecti
Software Installation In order to install the software driver for the Modem, you first need to install the DSL-300 Configuration Utility, D-Link’s G
3. The User Information window asks you for your name and company name. Enter this information in the appropriate field and click Next. 4. In t
6. The Start Copying Files window provides an opportunity to review the information you have just entered. If you are satisfied with the informati
A Configuration Utility icon should now be seen on your desktop screen.
Configure the Modem With the Configuration Utility software installed, you are ready to configure the Modem. You must enter the VPI and VCI values
Type in these numbers in the ADSL Setting field and click Finish. 4. The Save configuration and restart system window will appear. You will be as
Install the USB Driver To install the USB driver for a computer-attached configuration with a computer running a Windows operating system, follow th
4. Insert the PC Driver install disk. 5. Check the Floppy disk drive option and click on Next. The following dialog box is displayed which confir
Installing the PC (Ethernet Client) Driver To install the PC (Ethernet Client) driver for a PC-attached configuration on a PC running Windows 98 SE/
4. Insert the PC Driver install disk. 5. Check the Floppy disk drive option and click on Next. The following dialog box is displayed which conf
8. Click on the Finish button to complete the installation. The PC driver for the VVB Ethernet port is now installed. 9. You will be asked to re
4. Click on the Internet Protocol item in the list box. 5. Click on the Properties button. The Internet Protocol (TCP/IP) Properties window is
Modem Diagnostics The Configuration Utility can be used to monitor the activity and performance of the Modem. The four status windows are read-only
The General ADSL Information menu displays information on packets received and transmitted via the ADSL line as well as the ADSL settings. This is
The Advanced ADSL Information menu lists information about errors, signal characteristics and loop distance. The data provided in the Advanced ADSL
A Technical Specifications General Standards: ITU G.992.1 (G.dmt) ITU G.992.2 (G.lite) ITU G.994.1 (G.Hs) ANSI T1.413 (Issue 2) Protocol: TCP/IP Da
B DSL-302G Firmware Upgrade Utility You can update system firmware using the DSL-302G Firmware Upgrade Utility. To upgrade the Modem’s firmware you
i Wichtige Sicherheitshinweise 1. Bitte lesen Sie sich diese Hinweise sorgfältig durch. 2. Heben Sie diese Anleitung für den spätern Gebrauch auf
In the new window, you will see the MAC address of the Modem and the IP address of the PC you are using. The PC and the Modem must be on the same s
D-Link Systems, Inc. (“D-Link”) provides this limited warranty for its product only to the person or entity who originally purchased the product fr
the foregoing requirements, or that is determined by D-Link not to be defective or non-conforming. What Is Not Covered: This limited warranty provi
iiFCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not caus
TABLE OF CONTENTS ABOUT THIS USER’S GUIDE...
DSL-302G ADSL Ethernet Modem User’s Guide 3 About This User’s Guide This user’s guide provides instructions on how to install the DSL-302G ADSL Modem
Introduction This section provides a brief description of the Modem, its associated technologies and a list of Modem features. What is ADSL? Asymmet
Commentaires sur ces manuels