DSL-200 ADSL USB Modem User’s Guide ( Mar. 2004) 651AU2000055 Printed In China RECYCLABLE
ADSL Service In order to use the Modem you must first have ADSL service established with a DSL service provider. There are four standards used for
Use the tables provided here to record the information you need to install the Modem. SETTINGS TABLE (all users) VPI: VCI: Software Driver: The dri
1 2 INTRODUCTION ADSL modem technology is a relatively new technology and may be unfamiliar to the reader. In this section, we introduce you to ADS
Product Features The D-Link DSL-200 Modem provides the following features: Ø G.hs compliant (Auto-handshake) Ø G.dmt full rate compliant Ø G.lite co
Front Panel LED Indicators There are two LED indicators on the Modem: ♦ Power - Indicates the Modem is powered on when lit. ♦ ADSL Link – Indi
2 3 MODEM INSTALLATION Before you connect the USB cable, you must install the driver. See the next chapter for driver installation instructions. Th
3 4 SOFTWARE INSTALLATION The DSL-200 can be used with the following operating systems: ♦ Microsoft Windows 98 ♦ Microsoft Windows 98 Second Edit
Install the Software Driver Install the software driver on a computer using the Windows 98, Windows 98 Second Edition, Windows 2000 or Windows Mill
3. The Welcome window will appear. Make sure you have quit all other programs and click Next. 4. In the Select Service Provider window, select “Oth
5. In the Select Driver Type window, choose the driver that best suits your ADSL connection, and then click Next. 6. In the Communication Setting
DSL-200 ADSL USB Modem User’s Guide iWichtige Sicherheitshinweise 1. Bitte lesen Sie sich diese Hinweise sorgfä ltig durch. 2. Heben Sie diese Anleit
7. In the same window, select the appropriate Encapsulation method from the drop-down menu. You will select the encapsulation setting that is appro
9. The Ready To Install window appears. Click Next to copy the needed driver files. 10. After clicking Next, the Installing screen below will
11. After the files are downloaded, another Installing screen will prompt you to plug your modem into your computer. Plug the rectangular end of th
13. At the end of this process, the Reboot screen will appear prompting you to restart your computer. Choose “Yes” because it is necessary to reboo
Verify the ADSL Connection Before you continue to the final step, make sure that the ADSL connection has been established. This can be done easily
4 CONNECT TO THE INTERNET Now that the driver has been installed, you are ready to connect to the Internet. You establish an Internet connection ind
1. From the Windows desktop double-click on the D-Link PPP Connection icon. In the Connect To window type in the correct User name and Password gi
Connect to Internet - LAN Driver Users If your ADSL connection uses either the RFC 2684 or the RFC 1577 protocol, you must set your own TCP/IP conf
Windows 2000 or Windows XP (LAN Driver) 1. Double-click on the My Computer icon, then the Control Panel icon, and then the Network and Dial-up Conne
5 5 MONITORING THE MODEM Once you have installed the Modem you can monitor the status of the ADSL connection by clicking on the connection icon in
DSL-200 ADSL USB Modem User’s Guide iiLimited Warranty Hardware: D-Link warrants its hardware products to be free from defects in workmanship and mat
Under the screen to the left are two scroll buttons . Clicking on the right scroll button will bring up the screen pictured above, showing the Cu
6 CHANGING MODEM CONFIGURATION Once the Modem and software have been installed the communication settings may be easily updated by performing the fo
The “Communication Settings” window will be displayed. Make the necessary changes to the VPI, VCI, Encapsulation type and/or Modulation type and c
B 7 UNINSTALLING THE MODEM If you need to uninstall the Modem, use the Uninstall program available in the DSL-200 Modem folder. Failure to use the
2. You are asked to confirm your intention to remove the device (software). Click Yes to uninstall the Modem. 3. A new window appears and asks
5. The final window informs you that the uninstall process will be completed after rebooting your computer. Click Close to reboot your computer a
A 6 TECHNICAL SPECIFICATIONS General Standards: ANSI T1.413 issue 2 ITU G.992.1 (G.dmt) ITU G.992.2 (G.lite) ITU G.994.1 (G.hs) USB 1.1 specifica
Offices Australia D-Link Australasia Unit 16, 390 Eastern Valley Way, Roseville, NSW 2069 Australia TEL: 61-2-9417-7100 FAX: 61-2-9417-1077 TO
Norway D-Link Norway Waldemar Thranesgt. 77, 0175 Oslo, Norway TEL: 47-22-991890 FAX: 47-22-207039 Russia D-Link Russia Michurinski Prospekt
DSL-200 ADSL USB Modem User’s Guide iiipurchase from D-Link or its Authorized Reseller. D-Link warrants the magnetic media, on which D-Link provides
Registration Card Print, type or use block letters. Your name: Mr./Ms__________________________________________________________________________ Orga
DSL-200 ADSL USB Modem User’s Guide ivTrademarks Copyright 2003 D-Link Corporation. Contents subject to change without prior notice. D-Link is a reg
Table of Contents OVERVIEW OF THE USER’S GUIDE...
About This User’s Guide This user’s guide tells you how to install your DSL-200 ADSL USB Modem and use it to connect to the Internet. ADSL services
Before You Start In addition to the Modem hardware and software drivers, you will to gather information before you begin to install the device. Yo
Microfilters Note: Do not install the microfilter between the Modem and the telephone jack. Microfilters are only intended for use with regu
Commentaires sur ces manuels