D-Link EXPRESS ETHERNETWORK VDI-604 Spécifications télécharger pdf (Page 64)

Frequently Asked Questions

When entering the IP Address of the VDI-624 (192.168.0.1), you are not connecting

to the Internet or have to be connected to the Internet. The device has the utility built-

in to a ROM chip in the device itself. Your computer must be on the same IP subnet

to connect to the web-based utility.

To resolve difficulties accessing a web utility, please follow the steps below.

SteSte

Ste

p 1p 1

p 1

Verify physical connectivity by checking for solid link lights on the device. If

you do not get a solid link light, try using a different cable or connect to a different

port on the device if possible. If the computer is turned off, the link light may not be

on.

The following connections require a Crossover Cable:

Computer to Computer

Computer to Uplink Port

Computer to Access Point

Computer to Print Server

Computer/XBOX/PS2 to DWL-810

Computer/XBOX/PS2 to DWL-900AP+

Uplink Port to Uplink Port (hub/switch)

Normal Port to Normal Port (hub/switch)

The following connections require a Straight-through Cable:

Computer to Residential Gateway/Router

Computer to Normal Port (hub/switch)

Access Point to Normal Port (hub/switch)

Print Server to Normal Port (hub/switch)

Uplink Port to Normal Port (hub/switch)

Rule of Thumb:

”If there is a link light, the cable is right.”

What type of cable should I be using?

Why can´t I access the web based configuration?

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 90 91

Pas de commentaire

D-Link EXPRESS ETHERNETWORK VDI-604 Spécifications Page 64