D-Link DIR-810L Manuel d'utilisateur télécharger pdf (Page 100)

96D-Link DIR-810L User Manual

Section 3 - Conguration

IPv6 Firewall

The DIR-810L’s IPv6 Firewall feature allows you to congure which kind of IPv6 trac is allowed to pass through the device.

The DIR-810L’s IPv6 Firewall functions in a similar way to the IP Filters feature.

Check the box to enable the IPv6 rewall simple security.

Select an action from the drop-down menu.

Enter a name to identify the IPv6 rewall rule.

Use the drop-down menu to select the time schedule that

the IPv6 Firewall Rule will be enabled on. The schedule may

be set to Always, which will allow the particular service to

always be enabled. You can create your own times in the

Tools > Schedules section.

Use the Source drop-down menu to specify the interface that

connects to the source IPv6 addresses of the rewall rule.

Enter the source IPv6 address range in the adjacent IP

Address Range eld.

Use the Dest drop-down menu to specify the interface that

connects to the destination IP addresses of the rewall rule.

Select the protocol of the rewall port (All, TCP, UDP, or

ICMP).

Enter the rst port of the range that will be used for the

rewall rule in the rst box and enter the last port in the

eld in the second box.

Enable Checkbox:

Congure IPv6

Firewall:

Name:

Schedule:

Source:

IP Address Range:

Dest:

Protocol:

Port Range:

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 147 148

Pas de commentaire

D-Link DIR-810L Manuel d'utilisateur Page 100