D-Link DIR-850L Manuel d'utilisateur télécharger pdf (Page 63)

59D-Link DIR-850L User Manual

Section 3 - Conguration

DHCP Server Settings

DHCP stands for Dynamic Host Control Protocol. The DIR-850L has a built-in DHCP server. The DHCP Server will automatically

assign an IP address to the computers on the LAN/private network. Be sure to set your computers to be DHCP clients by setting

their TCP/IP settings to “Obtain an IP Address Automatically.” When you turn your computers on, they will automatically load

the proper TCP/IP settings provided by the DIR-850L. The DHCP Server will automatically allocate an unused IP address from

the IP address pool to the requesting computer. You must specify the starting and ending address of the IP address pool.

Check this box to enable the DHCP server on your router.

Uncheck to disable this function.

Enter the starting and ending IP addresses for the DHCP

server’s IP assignment.

Note: If you statically (manually) assign IP addresses to your

computers or devices, make sure the IP addresses are outside

of this range or you may have an IP conict.

The length of time for the IP address lease. Enter the Lease

time in minutes.

If all the computers on the LAN successfully obtain their

IP addresses from the router’s DHCP server as expected,

this option can remain disabled. However, if one of the

computers on the LAN fails to obtain an IP address from the

router’s DHCP server, it may have an old DHCP client that

incorrectly turns o the broadcast ag of DHCP packets.

Enabling this option will cause the router to always broadcast its responses to all clients, thereby working around the problem, at

the cost of increased broadcast trac on the LAN.

Check this box to allow the DHCP Server to oer NetBIOS conguration settings to the LAN hosts. NetBIOS allow LAN hosts to

discover all other computers within the network, e.g. within Network Neighborhood.

If NetBIOS announcement is switched on, it will cause WINS information to be learned from the WAN side, if available. Turn this

setting o to congure manually.

Enable DHCP

Server:

DHCP IP Address

Range:

DHCP Lease Time:

Always

Broadcast:

NetBIOS

Announcement:

Learn NetBIOS

from WAN:

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 154 155

Pas de commentaire

D-Link DIR-850L Manuel d'utilisateur Page 63