D-Link DSL-2740U Manuel d'utilisateur télécharger pdf (Page 32)

Section 3 - Configuration

D-Link DSL-2740U User Manual

For PPPoE/PPPoA connection

Type in the Username and Password (and PPPoE Service Name, if

required by your ISP).

Select the specific Authentication Method from the drop-down menu

(PAP or CHAP). Or user default AUTO to allow Router to negotiate with

PPP server automatically.

Dial on demand

If checked, will tear down the PPP link automatically when there is no

incoming/outgoing packet via WAN interface for the programmed period

of time that is set below (in minutes). Router activates PPPoE

connection automatically when user wants to access Internet.

PPP IP extension

Router passes the obtained IP address to the local PC and acts as a

bridge only modem.

Use Static IP Address

Type in the IP address given by your ISP in this field if your Router’s IP

address is not dynamically assigned.

Default gateway

Select Obtain default gateway automatically or set default gateway

manually

Click on the Next button to go to the next window.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 102 103

Pas de commentaire

D-Link DSL-2740U Manuel d'utilisateur Page 32