D-Link DCS-2100+ Spécifications télécharger pdf (Page 7)

DC Power Connector

The DC power input connector is located on the DCS-2100+ Internet Camera’s

back panel and is labeled 12VDC with a single socket to supply power to the

Internet Camera.

I/O Connector

The DCS-2100+ provides a terminal block with two pairs of connectors situated

on the back panel. One pair is for input and the other is for output. The I/O

connectors provide the physical interface to send and receive digital signals to

a variety of external alarm devices. Please refer to the Appendix (Page 93)

in this manual for detailed information.

Connections (continued)

Located on the bottom panel of the Internet Camera, the socket is used to con-

nect the camera stand to the Internet Camera by attaching the screw head on

the camera stand to the Internet Camera.

Bottom Panel

Socket for stand

Power LED

LED stands for Light-Emitting Diode.

The Power LED is positioned to the right of the Internet Camera lens. As soon

as the power adapter is connected to the Internet camera the power LED will

flash red and green several times, the DCS-2100+ is conducting a self-test.

Upon passing the self-test the LED will turn green to indicate a good connection

to an Ethernet port or red to indicate no connection has been made.

Attachment socket for the Camera Stand

1 2 3 4 5 6 7 8 9 10 11 12 ... 102 103

Pas de commentaire

D-Link DCS-2100+ Spécifications Page 7