D-Link DIV-140 Manuel d'utilisateur télécharger pdf (Page 10)

D-Link DIV-140 User Guide 10

Web-based Conﬁguration

To use the web-based conﬁguration utility you must use a computer either directly connected to the device using a cross-over Ethernet

cable or connected to the same network as the DIV-140. The default IP address is 10.0.0.1. If your network is using a different IP range,

you must ﬁrst statically assign your computer an IP address of 10.0.0.2 (subnet mask - 255.0.0.0) and change the IP address of the

DIV-140 to an available IP address of your network.

To change your computer’s IP address, please refer to the Networking Basics section in this user guide.

Open a web browser such as Internet Explorer and enter https://10.0.0.1

and press Enter.

Note: You must enter HTTPS instead of HTTP.

If a security warning appears, click Yes to continue.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 52 53

Pas de commentaire

D-Link DIV-140 Manuel d'utilisateur Page 10