D-Link DSN-2100-10 - xStack Storage Area Network Array Hard Drive Guide de l'utilisateur télécharger pdf (Page 20)

20 Chapter 3 Installing the DSN-2100 Storage System

3.3 Items Supplied by the User

Table 3-1 lists the additional items you must supply to perform the DSN-2100 storage system

installation. All users must provide the items in the first row of Table 3-1. Thereafter, the

additional items required for installation depend on the user category into which you fit.

Table 3-1. User-Supplied Items to Perform the DSN-2100 Storage System Installation

User Category User-Supplied Items

All Users  A PC with a Network Interface Card (NIC) that will act as the iSCSI initiator. (See Note 1.)

 A PC with a NIC and Internet access that will access the management console. (See Note 1.)

 One or more available AC outlets not controlled by a wall switch.

 Optional: An Ethernet switch and Ethernet cable. If you want to use the DSN-2100 storage

system’s Link Aggregation feature, the switch must support LAGs.

 An IP address for each DSN-2100 storage system host connection RJ-45 data port that will

connect to your SAN.

 An Ethernet cable for each DSN-2100 storage system host connection RJ-45 data port that will

connect to your SAN (the DSN-2100 storage system auto-senses the cable type used).

Rack-Mount Users  A standard NEMA-compliant 19-inch rack.

 Additional Mounting hardware for specific rack being used.

Note 1: For convenience, one PC with three installed NICs can be used instead of separate PCs. In this configuration, one NIC

connects to the DSN-2100 storage system management port, a second NIC connects to the Internet, and a third NIC is used

with the iSCSI initiator.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 35 36

Pas de commentaire

D-Link DSN-2100-10 - xStack Storage Area Network Array Hard Drive Guide de l'utilisateur Page 20