D-Link 502G - DSL Router - EN Guide de l'utilisateur télécharger pdf (Page 54)

DSL-502G ADSL Router User’s Guide

Static Route Configuration – Modify/Add

Figure 23. Static Route Configuration Menu

To add or modify a static route, define the following parameters:

Name

Provide a name for the static route or subnet (optional).

IP Address

Type in the IP address of the subnet or device where packets are routed.

Subnet Mask

Type in an appropriate subnet mask that allows the static route to function.

Gateway

Type in the IP address of the gateway used for traffic destined for the specified

subnet or device.

Metric

Type in the maximum number of hops allowed for the static route.

State

Enable of disable the route using the drop-down menu.

Click on OK to put the static route into the table. It will appear in the Static Route Table shown previously.

To clear the settings for this configuration, click the Clear button.

To return to the Static Route Table, click the Exit icon.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 85 86

Pas de commentaire

D-Link 502G - DSL Router - EN Guide de l'utilisateur Page 54