D-Link 707P - DI Router Spécifications télécharger pdf (Page 30)

Using the Configuration Menu

Advanced > Routing

Static routes can be added if you require specific routes within your internal network.

These routes will not apply to the WAN (Internet) network.

Destination- Enter in the IP of the specified network that you want to

access using the static route.

Subnet Mask- Enter in the subnet mask to be used for the specified net

work.

Gateway- Enter in the gateway IP address to the specified network.

Hop- Enter in the amount of hops it will take to the specified

network.

Enable- Select this option for the specified static route to take effect.

Hop Count - In a transmission path, each link is terminated at a network device

such as a router or gateway. The number of hops equals the number of routers or

gateways that data must pass through before reaching the destination.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 108 109

Pas de commentaire

D-Link 707P - DI Router Spécifications Page 30