D-Link DE-816TAC - Hub - Stackable Guide de l'utilisateur télécharger pdf (Page 38)

Dual-Speed Stackable Hubs User’s Guide

Making Connections26

connections require either a Category 5 UTP cable or an STP cable. These

cables can be up to 100 meters long.

Each Ethernet connection requires a Category 3 or better UTP cable and can

also be up to 100 meters long. It is recommended that you use Category 5

cabling for all connections, in order to make it easier to transition all stations

to 100Mbps.

You can connect any combination of PCs, servers, and other single-address

network devices to the twisted-pair ports using straight-through twisted-pair

cables. These cables should not be crossed over. The following figure illus-

trates the pin assignments for a straight-through cable:

When connecting a PC or a server, the system being connected should have

an Ethernet or Fast Ethernet network interface card with a twisted-pair port.

The following figure shows a typical connection between the hub and end-

stations:

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 146 147

Pas de commentaire

D-Link DE-816TAC - Hub - Stackable Guide de l'utilisateur Page 38