D-Link DGE-550SX Guide de l'utilisateur télécharger pdf (Page 11)

-9-

The message “Do you want to copy driver <driver name>.LAN?” is

displayed.

8. To copy the driver to the server, select Y

ES.

If an older version of a D-Link driver is installed on the system, the messages

“Save existing file SYS:SYSTEM\<driver name.LAN?” and “Save

existing file SYS:SYSTEM\<driver name>.LDI?” are displayed.

9. To continue, select the desired options (Y

ES or NO).

If you selected Y

ES, the old driver is written to a predefined location which is dis-

played.

If you selected N

O, the old driver is overwritten.

In any case, the menu “Board M4CXNW_1 (Driver <driver name>) Actions” is dis-

played.

10. Select S

ELECT MODIFY DRIVER PARAMETERS/PROTOCOLS.

11. Configure the protocols to be used.

12. Configure the parameters, e.g. “slot number”.

13. After the parameters have been configured, select S

AVE PARAMETERS AND LOAD

DRIVER.

The driver is loaded.

14. If desired, change the network adapter parameters or bindings in the

autoexec.ncf file using the “Nwconfig” tool.

Novell Netware 6.x

To install the network driver on Novell NetWare 6.x, proceed as follows:

1. After you have installed the network adapter in your computer, boot your NetWare

system.

NetWare detects the new network adapter and tries to install a driver.

2. To get a list of available drivers, press <Enter>.

3. The menu “Select a driver” is displayed.

4. To install an unlisted driver, press <Insert> (the D-Link driver is not listed).

5. To specify the path to the driver, press <F3>.

The window “Specify a directory path” is displayed.

6. Type the path to the driver.

If you are installing from CD-ROM, the menu “Select an action” is displayed.

Here, select C

ONTINUE AND ACCESS THE CD-ROM.

The menu “Select a driver to install” is displayed.

7. Select the driver for your network adapter.

The driver is now loaded.

8. Select R

ETURN TO DRIVER SUMMARY.

9. Select C

ONTINUE.

10. To configure the protocols to be used, select A

DD PROTOCOL.

11. Select R

ETURN TO THE DRIVER SUMMARY to finish the installation.

12. If desired, change the network adapter parameters or bindings in the

autoexec.ncf file using the “Nwconfig” tool.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 24 25

Commentaires sur ces manuels

Pas de commentaire

D-Link DGE-550SX Guide de l'utilisateur Page 11

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau D-Link DGE-550SX