D-Link DP-601M Guide de l'utilisateur télécharger pdf (Page 31)

Internet Server User’s

Installation 11

• 10 Mbps Ethernet connections must use Category 3 or

better twisted-pair cabling fitted with RJ-45 connectors.

• 100 Mbps Fast Ethernet connections must use shielded

twisted pair (STP) or Category 5 or better unshielded

twisted-pair (UTP) cables fitted with Category 5 RJ-45

connectors.

• Cat 5 UTP cables use the same RJ-45 connector used

with 10BASE-T, wired in the same configuration.

Connections

As mentioned before, the internet server comes equipped with an

NWay Ethernet/Fast Ethernet RJ-45 LAN port. To connect the

internet to your LAN, simply plug one end of a straight-through ca-

ble into the LAN port on the internet server, and the other end into a

normal (non-Uplink) port on a hub or switch (as shown below). Both

devices can be receiving power when making this connection.

LAN Connection

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 94 95

Pas de commentaire

D-Link DP-601M Guide de l'utilisateur Page 31