D-Link DSL-100D - 8 Mbps DSL Modem Guide de l'utilisateur télécharger pdf (Page 30)

2. In the Configuration menu, you will need to choose the ADSL connection mode as instructed by

your ADSL service provider. Select ANSI T1.413 Issue 2, ITU G992.2 Annex A (G.lite), or

ITU G992.2 Annex A in the Select ADSL Mode field by checking the box to the left of the mode.

If you are unsure which mode to select you can select all three, the correct one will be detected

automatically. Click Set when finished.

3. In the same window, you must define the data framing method used in the Framing pull-down

menu. If your ADSL service provider doesn’t instruct you which framing method to use, choose

VC MUX for RFC 2364 (PPPoA), LLC/SNAP for RFC 1483 (MPoA) and RFC 1577 (IPoA). You

must also enter the VPI and VCI values assigned to you. Click Setting when finished.

1. You must restart for the settings to take effect. Click Yes.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 43 44

Pas de commentaire

D-Link DSL-100D - 8 Mbps DSL Modem Guide de l'utilisateur Page 30