D-Link DSL-302T Guide d'installation télécharger pdf (Page 5)

If you are connecting to the modem using Ethernet cable, connect the Ethernet cable and click on Next

If you are going to connect to the modem via USB cable, DO NOT connect the USB cable at this stage.

You will need to connect the USB cable after finishing the software installation and rebooting the

computer.

* If you connected the USB cable before installing the driver please refer to paragraph 3.1.1. of the

Troubleshooting section at the end of this guide.

Click on Next

1 2 3 4 5 6 7 8 9 10 11

Pas de commentaire

D-Link DSL-302T Guide d'installation Page 5