D-Link DSL-310 Manuel d'utilisateur télécharger pdf (Page 76)

D-Link DSL-2760U USER’S MANUAL

Adding an interface group

To create a new interface group:

1. Enter the Group name and the group name must be unique and select

either 2. (dynamic) or 3. (static) below:

2. If you like to automatically add LAN clients to a WAN Interface in the new

group add the DHCP vendor ID string. By configuring a DHCP vendor ID

string any DHCP client request with the specified vendor ID (DHCP option

60) will be denied an IP address from the local DHCP server.

3. Select interfaces from the available interface list and add it to the grouped

interface list using the arrow buttons to create the required mapping of the

ports. Note that these clients may obtain public IP addresses

4. Click the Apply/Save button to make the changes effective immediately

IMPORTANT: If a vendor ID is configured for a specific client device please

REBOOT the client device attached to the modem to allow it to obtain an

appropriate IP address.

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 127 128

Pas de commentaire

D-Link DSL-310 Manuel d'utilisateur Page 76