D-Link DFE-690TXD Manuel d'utilisateur télécharger pdf (Page 34)

Select “Microsoft.”

Scroll down and select “TCP/IP.”

Click “OK.”

Now the “TCP/IP for D-Link DFE-690TXD Cardbus PC Card” is

available. The TCP/IP Installation is complete.

Configuring a Dynamic IP Address

When the drivers are installed, the default setting is set to obtain

an IP dynamically through a DHCP server.

If you need to check or change the settings, then do the following:

Go to START > SETTINGS > CONTROL PANEL

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 56 57

Pas de commentaire

D-Link DFE-690TXD Manuel d'utilisateur Page 34