D-Link AirPlus Xtreme G+ DI-624+ Spécifications télécharger pdf (Page 22)

Using the Configuration Menu (continued)

Advanced > Applications

Some applications require multiple connections, such as Internet gaming, video

conferencing, Internet telephony and others. These applications have difficulties

working through NAT (Network Address Translation). Special Applications makes

some of these applications work with the DI-624. If you need to run applications that

require multiple connections, specify the port normally associated with an application

in the “Trigger Port” field, select the protocol type as TCP or UDP, then enter the

public ports associated with the trigger port to open them for inbound traffic.

The DI-624 provides some predefined applications in the table on the bottom of the

web page. Select the application you want to use and enable it.

Note! Only one PC can use each Special Application tunnel.

Name:

This is the name referencing the special application.

Trigger Port: This is the port used to trigger the application. It can be either

a single port or a range of ports.

Trigger Type: This is the protocol used to trigger the special application.

Public Port:

This is the port number on the WAN side that will be used to

access the application. You may define a single port or a

range of ports. You can use a comma to add multiple ports or

port ranges.

Public Type: This is the protocol used for the special application.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 92 93

Pas de commentaire

D-Link AirPlus Xtreme G+ DI-624+ Spécifications Page 22