D-Link DCS-1100 - mydlink-enabled Wired Network Camera Spécifications télécharger pdf (Page 25)

20D-Link DCS-1100/1130 User Manual

Section 4 - Conﬁguration

Network SetupallowsyoutocongureyourLANandInternetconguration.

DHCP Connection: This allows your camera to get an IP address

automatically from your router or Internet service. If you are not sure

whichLANsettingstouse,tryusingDHCPmoderst.

Static IP Address: This allows you to manually set the IP address

information for your camera.

IP Address: Enter the IP address the camera should use.

Subnet Mask: Enter the subnet mask that the camera should use.

Default Gateway: Enter the default gateway that the camera should

use.

Primary DNS: Enter the IP address of the primary DNS server that the

camera should use.

Secondary DNS: Enter the IP adress of the secondary DNS server that the camera should use.

Note: If you need to use a static IP address and you do not know the network information, contact your Internet Service

Provider (ISP) for assistance.

Setup > Network Setup

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 62 63

Pas de commentaire

D-Link DCS-1100 - mydlink-enabled Wired Network Camera Spécifications Page 25