D-Link DKVM-IP8 Guide d'installation Page 49
- Page / 71
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
48
Remote Console is unconditionally catching this keystroke already. Typical examples are
“Control+Alt+Delete” on Windows and DOS, what is always caught, or “Control+Backspace” on
Linux for terminating the X-Server. The syntax to define a new Button Key is as follows:
[confirm] <keycode>[+| -[*]<keycode>]*
“confirm” requests confirmation by a dialog box before the key strokes will be sent to the remote
host.
“keycode” is the key to be sent. Multiple key codes can be concatenated with a plus, or a minus
sign. The plus sign builds key combinations, all keys will be pressed until a minus sign or the
end of the combination is encountered. In this case all pressed keys will be released in
reversed sequence. So the minus sign builds single, separate keypresses and -releases. The
star inserts a pause with duration of 100 milliseconds.
6.4.2 Keyboard/Mouse
Figure 6-17. Keyboard and Mouse Settings
Host Interface
Enables a certain interface the mouse is connected to. You can choose between “Auto”
for automatic detection, “USB” for an USB mouse, and “PS/2” for a PS/2 mouse.
Warning: To use the USB and/or PS/2 interface you need a correct cabling between the
managed host and the managing device. If the managed host has no USB keyboard
support in the BIOS and you have connected the USB cable only then you will have no
remote keyboard access during the boot process of the host. If USB and PS/2 are both
connected and you selected “ Auto ” as host interface, then the card will select “ USB ”
if available or otherwise falls back to “ PS/2 ”. To use the PS/2 keyboard and mouse of
local console, you have to connect PS/2
cables between the device and the managed
host.
To get USB remote keyboard access during the boot process of the host, the following
conditions must be fulfilled:
• the host bios must have USB keyboard support
• the USB cable must be connected or must be selected in the Host interface option
- D-Link DKVM-IP8 1
- 8 Port KVM Switch 1
- CONTENTS 2
- 1. The quick installation 4
- Table 1-2: Serial parameters 5
- 2. Introduct 6
- 3. Hardware installation 10
- Configuration 13
- Important: 18
- Figure 5-2. Login screen 19
- Figure 5-3. Main page 20
- The Push Buttons ~ : 21
- 5.6 Hot Plug 25
- Figure 5-4. Remote Console 27
- Figure 5-12. Soft Keyboard 32
- Figure 5-15. Encoding 33
- Menu Options 34
- Figure 6-2. Telnet Console 35
- 6.2Virtual Media 36
- 6.2.1 Mapping 36
- 6.2.2 CD ROM 37
- 6.2.3 Drive redirection 40
- 6.2.3.1 Driver Installation 41
- DKVM-IP8 42
- 192.168.0.70 42
- 6.2.4 Options 44
- Figure 6-12. Set password 45
- Figure 6-13. Set User 45
- 6.4Settings 46
- Figure 6-18. Video Settings 50
- 6.5Network 51
- Figure 6-20. Dynamic DNS 53
- Figure 6-22. Device Security 54
- Figure 6-25. Serial Port 57
- Figure 6-27. Date and Time 59
- Figure 6-29. Event Log 59
- 6.6Tools 61
- Figure 6-33. Event Log List 62
- Figure 6-34. Update Firmware 63
- 7. Troubleshooting 64
- Certificates 67
- A. Pin Assignments 68
- A.5 KVM 15 pin connector 69
- B. Key Codes 70
- C. Video Modes 71
Produits connexes et manuels pour Serveurs D-Link DKVM-IP8
(2 pages)BNC 1621M podręczniki
Instrukcje obsługi i podręczniki użytkownika dla Urządzenia pomiarowe BNC 1621M.
Dostarczamy 1 pdf podręczników BNC 1621M do pobrania za darmo według typów dokumentów: Instrukcja Użytkownika
Commentaires sur ces manuels