D-Link xStack Guide de l'utilisateur télécharger pdf (Page 36)

26 Chapter 2 Getting Started

2.6 Powering Off the xStack Storage Array

If you no longer want to use the xStack Storage system, use the following procedure to power

it off.

The following steps are required for shutting down the xStack Storage

system. Failing to use this procedure to shut down the array will result in

battery power degradation if a UPS is not used. If the battery charge

exhausts, you will lose data.

1. Log off from all initiators.

2. In the View panel, click System Administration.

4. Click the Settings tab.

The Settings tab appears in the Detail Tabs area (see Figure 2-13).

Figure 2-13. Settings Tab

3. On the right side of the tab, click Shutdown.

4. Wait for the Ready LED on the array front panel to go off. Then manually power off your

xStack Storage system and any expansion arrays according to the instructions in the

hardware reference guide.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 136 137

Pas de commentaire

D-Link xStack Guide de l'utilisateur Page 36