D-Link PS Admin Manuel d'utilisateur télécharger pdf (Page 8)

DP-101P+ Print Server User’s Manual

8 Introduction

Printer Port

The printer port, is configurable by commands in the PS Admin

program, or by commands issued to the DP-101P+ via Telnet. See

the PS Admin User’s Guide for configuration procedures.

The print server also supports web configuration permitting users

to configure settings through the web browser. DP-101P+ default

IP address as follows:

♦ Default IP address – 192.168.0.1

♦ Subnet Mask – 255.255.255.0

Note:-

The PC’s IP address must correspond with the print server’s IP

address in the same segment for the two devices to communicate.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 25 26

Pas de commentaire

D-Link PS Admin Manuel d'utilisateur Page 8