D-Link DSN-1100-10 - xStack Storage Area Network Array Hard Drive Guide de l'utilisateur télécharger pdf (Page 48)

48 Chapter 4 Installing the XStack Storage

4.5 Installing the XStack Storage Unit without a Rack

When installing the XStack Storage unit on a desktop or shelf, allow enough ventilation space

between the XStack Storage unit and any other objects in the vicinity. In particular, be sure not to

block the air vents on the front and back of the XStack Storage unit enclosure. Install the cables

and power cord according to the procedures in the following sections.

4.6 Installing the XStack Storage Unit in a Rack

The XStack Storage unit can be mounted in a standard 19-inch rack. Use the following procedure,

along with the documentation for the rack, to install the XStack Storage unit in a rack.

The rack cabinet must provide sufficient airflow to the front and back of the

XStack Storage unit to maintain correct cooling. It must include ventilation

sufficient to exhaust the heat generated by equipment installed in the rack.

1. Be sure the XStack Storage unit is turned off and its three power cords are not attached to the

unit.

2. Attach the mounting hardware to the left and right sides of the XStack Storage unit. Refer to

the documentation for your mounting hardware and rack.

3. With the assistance of another person, hold the XStack Storage unit in place in the rack and

secure with the mounting hardware. Refer to the documentation for your mounting hardware

and rack.

4. Install the cables and power cord according to the procedures in the following sections.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 196 197

Pas de commentaire

D-Link DSN-1100-10 - xStack Storage Area Network Array Hard Drive Guide de l'utilisateur Page 48