D-Link DAP-3690 Manuel d'utilisateur télécharger pdf (Page 82)

82D-Link DAP-3690 User Manual

Section 5 - Troubleshooting

Troubleshooting

This chapter provides solutions to problems that can occur during the installation and operation of the DAP-3690 Wireless Access Point. We will

cover various aspects of the network setup, especially the network adapters. Please read the following if you are having any technical diculties.

Note: It is recommended that you use an Ethernet connection to congure the DAP-3690.

1. The computer used to congure the DAP-3690 cannot access the Conguration menu.

• CheckiftheLANLEDontheDAP-3690isON.IftheLEDisnotON,checkifthecablefortheEthernetconnectionissecurelyinserted.

• CheckiftheEthernetadapterisworkingproperly.Pleaseseeitem3ofthisTroubleshootingsectiontocheckthatthedriversforthenetwork

adapters are loaded properly.

• CheckiftheIPaddressisinthesamerangeandsubnetastheDAP-3690.

Note: The default IP address of the DAP-3690 is 192.168.0.50. All the computers on the network must have a unique IP address in the same range, e.g.

192.168.0.x. Any computers that have identical IP addresses will not be visible on the network. They must all have the same subnet mask, e.g. 255.255.255.0.

• DoaPingtesttomakesurethattheDAP-3690isresponding.GotoStart>Run>Type “Command” and at the DOS prompt, type “ping 192.168.0.50”.

A successful ping will show four replies.

Note: If you have changed the default IP address, make sure to ping the correct IP address assigned to the DAP-3690.

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 88

Commentaires sur ces manuels

Pas de commentaire

D-Link DAP-3690 Manuel d'utilisateur Page 82

Commentaires sur ces manuels

Produits connexes et manuels pour Points d'accès WLAN D-Link DAP-3690