D-Link DWL-1750 Manuel d'utilisateur télécharger pdf (Page 17)

Using the Conﬁguration Utility (continued)

Home > Mode > Remote Static IP Router

Select this option to input the Remote Static IP Address provided by your ISP

WAN - Wireless

LAN - Ethernet

The default IP Address of the Ethernet port is 192.168.0.50

IP Address-

All devices in the network must have the same Subnet Mask

Subnet Mask-

Click Apply if you have made any changes

Click Apply-

Input the IP Address assigned by your ISP

IP Address-

Input the Subnet Mask; all devices in the network must use

the same Subnet Mask

Subnet Mask-

Your ISP will provide this information

ISP Gateway

Address-

Your ISP will provide this information

DNS Server

Address-

NAPT- Select Disable or Enable. NAPT is a form of NAT; it provides

a type of ﬁrewall by hiding internal IP Addresses and it works

as an inbound virtual server, with IP based access control

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 81 82

Pas de commentaire

D-Link DWL-1750 Manuel d'utilisateur Page 17