D-Link DWL-510 Guide d'installation télécharger pdf (Page 17)

Home > DHCP

DHCP Server: Select Enabled or Disabled. Disabled is the default setting.

If you want to use the DWL-G730AP as a DHCP server, to automatically assign

dynamic IP addresses on the network, you will select Enabled.

Starting IP Address: If you have enabled the DHCP server function, enter the

starting point of the IP address range for your network.

Ending IP Address: Enter the ending IP address of your IP address range, if you

have enabled the DHCP function of the DWL-G730AP.

Lease Time: Choose the length of time during which the DHCP function of the

DWL-G730AP automatically regenerates the IP addresses to the devices in your

network.

DHCP Client Table: Lists the devices on your network that are receiving dynamic

IP addresses from the DWL-G730AP.

Using the Conﬁguration Utility in AP Mode (continued)

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 78 79

Pas de commentaire

D-Link DWL-510 Guide d'installation Page 17