D-Link DAP-3220 Manuel d'utilisateur télécharger pdf (Page 28)

DAP-3220 User’s Manual

D-Link Wireless 108G Exterior Access Point

Static (Manual) is chosen here. Choose this option if you do not have

a DHCP server in your network, or if you wish to assign a static IP

address to the DAP-3220. When DHCP is selected, the other elds

here will be greyed out.

The default IP address is 192.168.0.50. Assign a static IP address

that is within the IP address range of your network.

Enter the subnet mask. All devices in the network must share the

same subnet mask.

Enter the IP address of the gateway in your network. If there isn’t

a gateway in your network, please enter an IP address within the

range of your network.

Home > Basic Settings > LAN

Using the Conguration Menu

Get IP From:

IP Address:

Subnet Mask:

Default Gateway:

LAN is short for Local Area Network. This is considered your internal network. These are the

IP settings of the LAN interface for the DAP-3220. These settings may be referred to as private

settings. You may change the LAN IP address if needed. The LAN IP address is private to your

internal network and cannot be seen on the Internet.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 68 69

Pas de commentaire

D-Link DAP-3220 Manuel d'utilisateur Page 28