D-Link DSL-G624T Guide de l'utilisateur télécharger pdf (Page 66)

DSL-G624T Wireless A DSL Router User’s Guide

Routing

Use the Routing Table to specify a route used for data traffic within your Ethernet LAN or to route data on the WAN.

This is used to specify that all packets destined for a particular network or subnet use a predetermined gateway.

Routing Table

To add a static route to a specific destination IP on the local network, enter a Destination IP address, Netmask, then

click the Gateway radio button and type in the Gateway’s IP address. Click Apply to enter the new static route in the

table below. The route becomes active immediately upon creation.

To add a static route to a specific destination IP on the WAN, click the Connection radio button and choose a

connection from the pull-down menu, then enter a Destination IP address and Netmask. Click Apply to enter the new

static route in the table below. The route becomes active immediately upon creation and will appear in the table at the

bottom of the screen.

To remove a static route from the table in the bottom half of the window, choose to Delete it from the table and click

the Apply button. Remember to save the configuration changes.

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 96 97

Pas de commentaire

D-Link DSL-G624T Guide de l'utilisateur Page 66