D-Link SharePort Go II Manuel d'utilisateur télécharger pdf (Page 15)

11D-Link DIR-508L User Manual

Section 2 - Installation

Depending on your preferred mode of operation, the DIR-508L can be set up from any device with Wi-Fi and a web browser.

Note: Make sure the DIR-508L has been charged or is plugged in before using.

Using Broadband Ethernet: You will need an Ethernet cable connection

to your cable or DSL modem.

• Connect one end of an Ethernet cable to your modem and the other

end to the Internet port on the DIR-508L.

• Slide the mode switch to the On position. Allow one minute for your

DIR-508L to boot up.

• From your device’s wireless utility, connect to the DIR-508L. The default

Network name (SSID) is DIR508L with no password.

• Refer to ”Web-based Conguration Utility” on page 16.

Connecting your Equipment

Using a 3G/4G USB Adapter: You will need a compatible 3G/4G USB adapter

with an active SIM card.

• Plug the 3G/4G USB adapter into the USB port on the DIR-508L.

• Refer to “3G/4G Mobile Broadband” on page 20.

Note: Check the D-Link website for more information about compatible 3G/4G

USB adapters.

Connecting to a Hotspot: You will need the Wi-Fi network name and

password for the hotspot you want to connect to. Refer to “Wi-Fi Hotspot”

on page 22.

3G/4G USB Adapter

Wi-Fi Hotspot

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 117 118

Pas de commentaire

D-Link SharePort Go II Manuel d'utilisateur Page 15