D-Link DIR-330 - Wireless G VPN Router Spécifications télécharger pdf (Page 34)

29D-Link DIR-330 User Manual

Section 3 - Conﬁguration

Check this box to enable the DHCP server on

your router. Uncheck to disable this function.

Enter the starting and ending IP addresses for

the DHCP server’s IP assignment.

Note: If you statically (manually) assign IP

addresses to your computers or devices, make

sure the IP addresses are outside of this range

or you may have an IP conﬂict.

The length of time for the IP address lease.

Enter the Lease time in minutes.

Refer to the next page for the DHCP Reservation

function.

Enable DHCP

Server:

DHCP IP Address

Range:

DHCP Lease Time:

Add DHCP

Reservation:

DHCP Server Settings

The router has a built-in DHCP (Dynamic Host Control Protocol) server. The DHCP server will automatically assign an

IP address to the computers on the LAN/private network. Be sure to set your computers to be DHCP clients by setting

their TCP/IP settings to “Obtain an IP Address Automatically.” When you turn your computers on, they will automatically

load the proper TCP/IP settings provided by the DIR-330. The DHCP Server will automatically allocate an unused IP

address from the IP address pool to the requesting computer. You must specify the starting and ending address of the

IP address pool.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 111 112

Pas de commentaire

D-Link DIR-330 - Wireless G VPN Router Spécifications Page 34