D-Link DIR-330 - Wireless G VPN Router Spécifications télécharger pdf (Page 37)

32D-Link DIR-330 User Manual

Section 3 - Conﬁguration

IPSec Settings

Check this box to enable IPSec.

Enter a name for your VPN.

Enter the local (LAN) subnet and mask.

(ex. 192.168.0.0/24)

Select Site to Site or Remote User for the

required VPN conﬁguration.

• Site to Site - Network-to-network VPN in

which two entire LAN networks are virtually

connected across the Internet. If selected,

enter the destination gateway IP address in

the box which is the public WAN IP or host

address of the remote VPN server endpoint.

• Remote User – Client-to-server VPN in

which remote VPN clients can to connect to

the router from the Internet and access Local

Network resources.

If Site to Site is selected, enter the Destination

subnet and mask of the remote network.

(ex. 192.168.1.0/24)

Select Pre-shared Key or X.509 Certiﬁcate Authentication. One of these two authentication methods must be selected.

• Pre-shared Key - Manually enter ASCII passphrase in box.

• X.509 Certiﬁcate - For certiﬁcate authentication, certiﬁcates must be manually uploaded to the router. See the “Certiﬁcates”

section for details.

Enable:

Name:

Local Net/ Mask:

Remote IP:

Remote Local

LAN Net/ Mask:

Authentication:

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 111 112

Pas de commentaire

D-Link DIR-330 - Wireless G VPN Router Spécifications Page 37