D-Link DSL-302G Guide de l'utilisateur télécharger pdf (Page 36)

DSL-302G ADSL Modem User’s Guide

Configure the Internet Connection (ADSL Service Connection)

For ADSL connections using either a PPPoE or PPPoA type of connection, all the settings necessary to establish

the connection to your service provider’s network and ultimately to the Internet can be configured in the Quick

Configuration menu of the web manager. Most users will use the Quick Configuration menu. If you are

instructed to configure the device for a bridged connection or if you are setting up an IPoA connection, follow

the instructions beginning on the next page.

Configure PPPoA and PPPoE Connections

For ADSL accounts using PPPoA or PPPoE connections, follow the steps below to establish the Internet

connection:

1. Choose the Connection Type. Select

PPPoA LLC, PPPoA VC-Mux, PPPoE

VC-Mux, PPPoE LLC, from the pull-

down menu.

2. If necessary, change the VPI/VCI values.

Many users will use the default values

VPI: 8 and VCI: 35.

3. Type in the Username or account number

used to access the service provider’s

network.

4. Type in the Password for your account

used to access the service provider’s

network.

Quick Configuration

Save & Reboot

When you have defined the Quick Configuration settings, click the Save & Reboot button to save the settings in

temporary and reboot the system. The Modem will negotiate the ADSL connection automatically upon

rebooting. This will normally take a few seconds. When the ADSL connection has been successfully established,

the ADSL Link LED indicator will light steady green. If the ADSL Link indicator does not light after a minute

or so access the web configuration manager and double check the settings.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 98 99

Pas de commentaire

D-Link DSL-302G Guide de l'utilisateur Page 36