D-Link 3100 24 - DGS Switch - Stackable Guide d'installation télécharger pdf (Page 24)

DGS-3100 Series Gigabit Stackable Managed Switch Hardware Installation Guide

Powering on the Device

The device can be used with AC power supply 100-240 VAC, 50 - 60 Hz. The device’s power supply adjusts to the local

power source automatically, and can be powered on without having any or all LAN segment cables connected.

After the device is plugged in:

• All LED indicators, except console, momentarily flash. Flashing LEDs indicate the system is being reset.

• The console LED indicators flash while the device loads software and performs a self-test. When the POST is

passed, the LED darkens. If the POST fails, the LED lights solid amber. This indicator lights solid green when the

device is being logged-in via a local console management port (RS-232) using a straight-through serial cable.

CAUTION: In the event of a power failure, unplug the device. When power is resumed, plug the device

back in.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 73 74

Pas de commentaire

D-Link 3100 24 - DGS Switch - Stackable Guide d'installation Page 24