D-Link 502G - DSL Router - EN Guide de l'utilisateur télécharger pdf (Page 51)

DSL-502T ADSL Router User’s Guide

Dynamic Routing (RIP)

The Router supports RIP v1 and RIP v2 used to share routing tables with other Layer 3 routing

devices on your local network or remote LAN.

Dynamic Routing (RIP) menu

To enable RIP, select Enabled from the RIP pull-down menu, select the Protocol (RIPv1, RIPv2

and RIPv1 Compatible) and Direction (In, Out, or Both), and click Apply.

The RIPv1 Compatible option will respond to or send RIP requests compatible with both RIP v1 and

RIP v2.

The direction configuration refers to the RIP request. Select In to allow RIP requests from other

devices. Select Out to instruct the Router to make RIP requests for routing tables from other

devices. Select Both to share routing tables in both directions.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 72 73

Pas de commentaire

D-Link 502G - DSL Router - EN Guide de l'utilisateur Page 51