D-Link DP 300 - Print Server - Parallel Manuel d'utilisateur télécharger pdf (Page 11)

DP-300+ Multiprotocol Fast Ethernet Print Server User’s Guide

Introduction

♦ Power/Tx

◊ Steady or flashing green confirms that the DP-300+ is

powered on.

◊ The indicator blinks off briefly to indicate that the DP-

300+ is transmitting to the network.

♦ Link/Rx

◊ Steady or flashing green confirms that the DP-300+

has a good connection to the Ethernet or Fast

Ethernet network.

◊ The indicator blinks off briefly to indicate that the DP-

300+ is receiving from the network.

♦ LPT1, LPT2, COM

◊ These LED indicators light to show that the DP-300+

is transferring print data through the appropriate

parallel or serial port.

These three indicators are also used by the print server’s

power-on self test (POST) to indicate any hardware

failures.

Use of Stacking Brackets

First, make sure you have one pair of stacking brackets for

each device.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 37 38

Pas de commentaire

D-Link DP 300 - Print Server - Parallel Manuel d'utilisateur Page 11