D-Link DSA-3100P - B/W Thermal Line Printer Manuel d'utilisateur télécharger pdf (Page 11)

Artis zee

Floor-mounted system for surgical angiography

Operating modes

PERISTEPPING* (only with 30 x 40 flat detector)

Peripheral digital angiography stepping of the table with a single contrast medium injection performed while observing

the contrast medium bolus

Position-dependent variable frame rates

Fully automatic exposure control

The collimator setting is automatically saved for each stepping increment

PERIVISION* (only with 30 x 40 flat detector)

Peripheral digital angiography with stepping and online subtraction display in one examination procedure with a single

contrast medium injection while observing the contrast medium bolus

One automatically acquired mask image for each individual position

Position-dependent variable frame rates

Fully automatic exposure control

The collimator setting is automatically saved for each stepping increment

3D Acquisition* incl. DYNAVISION DSA/DR (30 x 40 flat detector)

Digital rotational angiography including 3D effect with dynamic, native subtracted image display and angle triggering.

By reducing the frame rate, angle triggering enables a reduction in dose while simultaneously improving image quality.

Bolus time and angle resolution can be preselected in the exposure program

Rotation speed up to 45°/s

Selectable exposure frequency up to 30 f/s in 1k matrix, 60 f/s in 0.5 k matrix

Dynamic subtraction display with optimal alignment of mask and filling

Automatic pixel shift over the entire scene

Digital rotational angiography with angle triggering for acquisition of syngo InSpace 3D high-contrast imaging* and

syngo DynaCT low-contrast imaging*

Overview of operating modes

DR, single image – 0.5-7.5 f/s*

DSA, single image – 0.5-7.5 f/s*

High-speed acquisition for DSA*, DR* up to 30 f/s*

Dynavision DR up to 60 f/s*

Dynavision DSA up to 60 f/s*

Card acquisition – FD 30 x 40 up to 30 f/s*; Pediatric* 60 f/s (20 x 20 flat detector)

Card subtraction – FD 30 x 40 up to 30 f/s*

* Option

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 31 32

Pas de commentaire

D-Link DSA-3100P - B/W Thermal Line Printer Manuel d'utilisateur Page 11