D-Link DWL-2100AP - AirPlus Xtreme G Guide d'installation Page 27
- Page / 91
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
27
Using the Configuration Menu (continued)
Advanced > Performance
Transmit
Power-
Choose full, half (-3dB), quarter (-6dB), eighth (-9dB), minimum
power.
Frequency-
The frequency remains at 2.437
GHz for channel 6. The frequency
will change to reflect the change
in the channel setting.
Channel-
Select from channels 1-11.
Fragment
Length-
The fragmentation threshold, which is specified in bytes, determines
whether packets will be fragmented. Packets exceeding the 2346 byte
setting will be fragmented before transmission. 2346 is the default
setting
DTIM-
(Delivery Traffic Indication Message)- 3 is the default setting. DTIM
is a countdown informing clients of the next window for listening
to broadcast and multicast messages.
Wireless Band-
Data Rate-
The Data Rates are Auto,
1Mbps, 2Mbps, 5.5Mbps,
6Mbps, 9Mbps, 11Mbps,
12Mbps, 18Mbps, 24Mbps,
36Mbps, 48Mbps, 54Mbps.
Beacon Interval-
Beacons are packets sent by an access point to synchronize a
network. Specify a beacon interval value. The default (100) is
recommended.
RTS Length-
This value should remain at its default setting of 2,346. If you
encounter inconsistent data flow, only minor modifications to the
value range between 256 and 2,346 are recommended
Super G Mode-
Super G is a group of performance enhancement features that increase
end user application throughput in an 802.11g network. Super G is
backwards compatible to standard 802.11g devices. For top perfor-
mance, all wirelss devices on the network should be Super G capable.
Select either Disabled, Super G without Turbo, Super G with Dynamic
Turbo, or Super G with Static Turbo, or Super G without Turbo.
Disabled-
Standard 802.11g support, no enhanced capabilities.
IEEE 802.11g
- D-Link AirPlus Xtreme G 1
- DWL-2100AP 1
- Contents 2
- Package Contents 3
- Introduction 4
- Connections 5
- LEDs as shown below: 6
- Features 7
- Wireless Basics 8
- Wireless Basics (continued) 10
- Installation Considerations 10
- Getting Started 11
- Getting Started (continued) 12
- Using the Configuration Menu 13
- Authentication: 15
- Home > LAN 26
- Advanced > Performance 27
- 802.11g only 28
- Radio Wave 28
- Wireless Band 30
- Internal Station 30
- Connection 30
- Ethernet to WLAN 30
- IEEE802.1Q standard 34
- Tools > Admin 36
- Tools > System 37
- Tools > Firmware 37
- Tools > Cfg File 38
- Tools > Misc 38
- Status > Device Info 39
- Status > Stats 40
- Status > Client Info 41
- Using the AP Manager 43
- IP Configuration 44
- Selecting Devices 44
- Device Configuration 45
- Configuration>Wireless 48
- Device Configuration>DHCP 54
- Configuration Files 57
- Firmware 58
- System Settings 58
- Setup Wizard 59
- Setup Wizard (continued) 60
- Networking Basics 63
- Networking Basics (continued) 64
- Input the Static IP Address 75
- Built-in Ethernet 76
- Troubleshooting 78
- Troubleshooting (continued) 79
- Technical Specifications 85
- Technical Support 88
- D-Link office 91
Produits connexes et manuels pour Points d'accès WLAN D-Link DWL-2100AP - AirPlus Xtreme G
(53 pages)Yamaha NUAGE V1.1 manuels
Manuels d'utilisation et guides de l'utilisateur pour Contrôleurs de DJ Yamaha NUAGE V1.1.
Nous fournissons des manuels en pdf 1 Yamaha NUAGE V1.1 à télécharger gratuitement par type de document : Manuel de l'utilisateur
Commentaires sur ces manuels