D-Link DWL-2100AP - AirPlus Xtreme G Guide d'installation télécharger pdf (Page 32)

Using the Conﬁguration Menu (continued)

Advanced > DHCP Server > Static Pool Settings*

DHCP Server

Control-

Enable or

Disable the DHCP

function here.

Static Pool

Settings

Assigned lP-

Enter the static IP

address of the

device here.

Assigned MAC

Address-

Enter the MAC

address of the

device here.

SubMask-

Enter the subnet

mask here.

Gateway-

Enter the IP address of the gateway on the network.

Wins-

Windows Internet Naming Service is a system that determines the IP address of the

a network computer that has a dynamically assigned IP address.

DNS-

Enter the IP address of the DNS server. The DNS server translates domain names such

as www.dlink.com into IP addresses.

Domain Name-

Enter the Domain Name of the DWL-2100AP.

Status-

Turn the Static Pool Settings ON or OFF here.

Assigned Static Pool

After you have input the Static Pool Settings for each device, click Apply and the

proﬁle will appear in this list at the bottom of the window.

*Please note that IPs assigned in the Static Pool Settings must not be in the same

range as those in the Dynamic Pool Settings.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 90 91

Pas de commentaire

D-Link DWL-2100AP - AirPlus Xtreme G Guide d'installation Page 32