D-Link DSA-3200 Manuel d'utilisateur télécharger pdf (Page 21)

COMMAND SAVE

COMMAND SYNTAX SAVE

ARGUMENTS None

DESCRIPTION Commands the DSA to save the RAM image of NVM. Any change to a

configuration variable must be followed by a SAVE command if the change

is to be permanent.

RETURNS <nl>

<nl> - End of line.

EXAMPLE To save the current configuration variable settings and conversion

coefficients,

Type: SAVE<CR>

COMMAND SCAN

COMMAND SYNTAX SCAN

ARGUMENTS None

DESCRIPTION Commands the DSA to scan the pressure sensors and send Scan packets

to the client.

EXAMPLE 1 A scan command is executed with EU set to 1, BIN set to 0, and FORMAT

set to 0. Data are scrolled and will be displayed as follows:

Frame # <number>

Time <time> <µs or ms>

“ ” “

” “ ”

EXAMPLE 2 A scan command is executed with EU set to 0, BIN set to 0, and FORMAT

set to 0. Data are scrolled and will be displayed as follows:

Frame # <number>

Time <time> <µs or ms>

“ ” “

” “ ”

EXAMPLE 3 A scan command is executed with EU set to 1, BIN set to 0, and FORMAT

set to 1. Data are scrolled and will be displayed as follows:

Frame = <number> Time = <time> <µs or ms>

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 51 52

Pas de commentaire

D-Link DSA-3200 Manuel d'utilisateur Page 21