D-Link DSA-3200 Manuel d'utilisateur télécharger pdf (Page 28)

VARIABLE XSCANTRIG

VALID VALUES 0 or 1

DEFAULT VALUE 0

DATA TYPE integer

DESCRIPTION Sets the External Trigger as the Frame Trigger.

0 = the internal clock is the frame trigger

1 = the external trigger is the frame trigger

VARIABLE Z C

VALID VALUES 0 or 1

DEFAULT VALUE 1

DATA TYPE integer

DESCRIPTION Sets zero correction on or off.

0 = no correction

1 = zero correction

NOTE 1: ZC must be set to 0 for the following conditions:

1. Model is set to 3207

2. The module has gauge transducers installed.

NOTE 2: ZC must be set to 0 for the following conditions:

1. Model is set to 3207

2. Absolute sensors are installed and the CALB command will

not be used.

NOTE 3: ZC must be set to 1 for the following conditions:

1. Model is set to 3217 or 3218

2. Differential transducers are installed

NOTE 4: ZC must be set to 1 for the following conditions:

1. Model is set to 3207

2. Absolute sensors are installed and the CALB command will be

used.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 51 52

Pas de commentaire

D-Link DSA-3200 Manuel d'utilisateur Page 28