D-Link DWS-1008 Informations techniques télécharger pdf (Page 180)

179

DWS-1008 CLI Reference Guide

D-Link Systems, Inc.

Access Point Commands

Access: Enabled

Usage: You also can conﬁgure a radio’s channel on the same command line. Use the

channel option. This command is not valid if dynamic power tuning (RF

Auto-Tuning) is enabled.

Examples: The following command conﬁgures the transmit power on the 802.11a radio

on the DWL-8220AP access point connected to port 5:

DWS-1008# set ap 5 radio 1 tx-power 10

success: change accepted.

The following command conﬁgures the channel and transmit power on the 802.11b/g radio

on the DWL-8220AP access point connected to port 2:

DWS-1008# set ap 2 radio 1 channel 1 tx-power 10

success: change accepted.

set dap security

Sets security requirements for management sessions between a DWS-1008 switch and its

Distributed APs. This feature applies to Distributed APs only, not to directly connected DWL-

8220APs conﬁgured on DWL-8220AP access ports. In addition, DWL-8220AP models DWL-

8220AP-101 and DWL-8220AP-122 do not have encryption keys and do not support this

feature regardless of how they are connected to the switch.

Note: The maximum transmission unit (MTU) for encrypted DWL-8220AP management

trafﬁc is 1498 bytes, whereas the MTU for unencrypted management trafﬁc is 1474 bytes.

Make sure the devices in the intermediate network between the switch and Distributed AP

can support the higher MTU.

Syntax: set dap security {require | optional}

require Require all Distributed APs to have encryption keys that have been

conﬁrmed in the CLI by an administrator.

optional Allows DWL-8220APs to be managed by the switch even if they do

not have encryption keys or their keys have not been conﬁgured by an

administrator.

Defaults: By default, encryption keys are optional. A DWS-1008 switch can conﬁgure

and manage a Distributed AP regardless of whether the DWL-8220AP has an

encryption key, and regardless of whether you have conﬁrmed the ﬁngerprint

by setting it in MSS.

Access: Enabled

1 2 ... 175 176 177 178 179 180 181 182 183 184 185 ... 405 406

Pas de commentaire

D-Link DWS-1008 Informations techniques Page 180