D-Link DWS-1008 Informations techniques télécharger pdf (Page 190)

189

DWS-1008 CLI Reference Guide

D-Link Systems, Inc.

Access Point Commands

Access: Enabled

Usage: You must disable all radios that are using a radio proﬁle before you can

change parameters in the proﬁle. Use the set radio-proﬁle mode command.

Examples: The following command changes the maximum receive threshold for radio

proﬁle rp1 to 4000 ms:

DWS-1008# set radio-proﬁle rp1 max-rx-lifetime 4000

success: change accepted.

set radio-proﬁle max-tx-lifetime

Changes the maximum transmit threshold for the DWL-8220AP radios in a radio proﬁle. The

maximum transmit threshold speciﬁes the number of milliseconds that a frame scheduled to

be transmitted by a radio can remain in buffer memory.

Syntax: set radio-proﬁle name max-tx-lifetime time

name Radio proﬁle name.

time Number of milliseconds. You can enter a value from 500 (0.5 second) through

250,000 (250 seconds).

Defaults: The default maximum transmit threshold for DWL-8220AP radios is 2000ms.

Access: Enabled

Usage: You must disable all radios that are using a radio proﬁle before you can

change parameters in the proﬁle. Use the set radio-proﬁle mode command.

Examples: The following command changes the maximum transmit threshold for radio

proﬁle rp1 to 4000 ms:

DWS-1008# set radio-proﬁle rp1 max-tx-lifetime 4000

success: change accepted.

set radio-proﬁle mode

Creates a new radio proﬁle, or disables or reenables all DWL-8220AP radios that are using

a speciﬁc proﬁle.

Syntax: set radio-proﬁle name [mode {enable | disable}]

radio-proﬁle Radio proﬁle name of up to 16 alphanumeric characters, name with no

spaces. Use this command without the mode enable or mode disable

option to create a new proﬁle.

1 2 ... 185 186 187 188 189 190 191 192 193 194 195 ... 405 406

Pas de commentaire

D-Link DWS-1008 Informations techniques Page 190