D-Link DWS-1008 Informations techniques télécharger pdf (Page 81)

DWS-1008 CLI Reference Guide

D-Link Systems, Inc.

IP Services Commands

set snmp notify target (continued)

SNMPv1 with Traps

To conﬁgure a notiﬁcation target for traps from SNMPv1, use the following command:

Syntax: set snmp notify target target-num ip-addr[:udp-port-number]

v1 community-string [proﬁle proﬁle-name]

target-num ID for the target. This ID is local to the DWS-1008 switch

and does not need to correspond to a value on the target

itself. You can specify a number from 1 to 10.

ip-addr[:udp-port-number] IP address of the server. You also can specify the UDP

port number to send notiﬁcations to.

community-string Community string.

proﬁle proﬁle-name Notiﬁcation proﬁle this SNMP user will use to specify the

notiﬁcation types to send or drop.

Defaults: The default UDP port number on the target is 162. The default minimum required

security level is unsecured. The default number of retries is 0 and the default timeout

is 2 seconds.

Access: Enabled

Usage: The inform or trap option speciﬁes whether the MSS SNMP engine expects the

target to acknowledge notiﬁcations sent to the target by the switch. Use inform if you

want acknowledgements. Use trap if you do not want acknowledgements. The inform

option is applicable to SNMP version v2c or usm only.

Examples: The following command conﬁgures a notiﬁcation target for acknowledged

notiﬁcations:

DWS-1008# set snmp notify target 1 10.10.40.9 usm inform user securesnmpmgr1

snmp-engine-id ip

success: change accepted.

This command conﬁgures target 1 at IP address 10.10.40.9. The target’s SNMP engine ID

is based on its address. The MSS SNMP engine will send notiﬁcations based on the default

proﬁle, and will require the target to acknowledge receiving them.

The following command conﬁgures a notiﬁcation target for unacknowledged

notiﬁcations:

DWS-1008# set snmp notify target 2 10.10.40.10 v1 trap

success: change accepted.

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 405 406

Pas de commentaire

D-Link DWS-1008 Informations techniques Page 81