53
DWS-1008 CLI Reference Guide
D-Link Systems, Inc.
VLAN Commands
show vlan config
Displays VLAN information.
Syntax: show vlan config [vlan-id]
vlan-id VLAN name or number. If you do not specify a VLAN, information for all VLANs
is displayed.
Defaults: None Access: All
Examples: The following command displays information for VLAN burgundy:
DWS-1008# show vlan config burgundy
Admin VLAN Tunl Port
VLAN Name Status State Affin Port Tag State
-------- -------- --------- -------- ------ ------ ------ -------
2 burgundy Up Up 5
2 none Up
3 none Up
4 none Up
5 none Up
The table below describes the fields in this display.
Field Description
VLAN VLAN number.
Name VLAN name.
Admin Status Administrative status of the VLAN:
• Down - The VLAN is disabled.
• Up - The VLAN is enabled.
VLAN State Link status of the VLAN:
• Down - The VLAN is not connected.
• Up - The VLAN is connected.
Port Member port of the VLAN. The port can be a physical port or a virtual
port.
• Physical ports are 10/100 Ethernet ports on the switch, and are listed
by port number.
Tag Tag value assigned to the port.
Port State Link state of the port:
• Down - The port is not connected.
• Up - The port is connected.
Commentaires sur ces manuels