D-Link DWS-1008 Informations techniques télécharger pdf (Page 26)

100

101

DWS-1008 CLI Reference Guide

D-Link Systems, Inc.

Port Commands

name name Name of the port group.

Defaults: None.

Access: Enabled.

Examples: The following command clears port group server1:

DWS-1008# clear port-group name server1

success: change accepted.

clear port name

Removes the name assigned to a port.

Syntax: clear port port-list name

port-list List of physical ports. MSS removes the names from all the speciﬁed ports.

Defaults: None

Access: Enabled

Examples: The following command clears the names of ports 4 through 8:

DWS-1008# clear port 4-8 name

clear port type

Caution: When you clear a port, MSS ends user sessions that are using the port.

Removes all conﬁguration settings from a port and resets the port as a network port.

Syntax: clear port type port-list

port-list List of physical ports. MSS resets and removes theconﬁguration from all the

speciﬁed ports.

Defaults: The cleared port becomes a network port but is not placed in any VLANs.

Access: Enabled

Usage: Use this command to change a port back to a network port. All conﬁguration settings

speciﬁc to the port type are removed. For example, if you clear a DWL-8220AP access

point port, all AP-speciﬁc settings are removed. The table on the next page lists the default

network port settings that MSS applies when you clear a port’s type.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 405 406

Commentaires sur ces manuels

Pas de commentaire

D-Link DWS-1008 Informations techniques Page 26

Commentaires sur ces manuels

Produits connexes et manuels pour Commutateurs de réseau D-Link DWS-1008