D-Link DWS-1008 Informations techniques télécharger pdf (Page 222)

221

DWS-1008 CLI Reference Guide

D-Link Systems, Inc.

Access Point Commands

Field Description

-----------------------------------------------------------------------------------------------------------------------

Channel Channel on which the BSSID is detected.

-----------------------------------------------------------------------------------------------------------------------

Neighbor BSS/MAC BSSID detected by the radio.

-----------------------------------------------------------------------------------------------------------------------

RSSI Received signal strength indication (RSSI), in decibels referred

to 1 milliwatt (dBm). A higher value indicates a stronger signal.

show dap connection

Displays the system IP address of the switch that has the active data connection for a

Distributed AP.

Syntax: show dap connection [dap-num | serial-id serial-ID]

dap-num Number of a Distributed AP for which to display information

about its active connection.

serial-id serial-ID DWL-8220AP access point serial ID.

Defaults: None.

Access: Enabled.

Usage: The serial-id parameter displays the active connection for the speciﬁed

Distributed AP even if that DWL-8220AP is not conﬁgured on this

switch. If you instead use the command with the dap-num parameter or

without a parameter, connection information is displayed only for Distributed

DWL-8220APs that are conﬁgured on this switch.

If a Distributed AP is conﬁgured on this switch but does not have an active

connection, the command does not display information for the DWL-8220AP.

To show conﬁgured Distributed APs regardless of connection status, use the

show dap global command.

Examples: The following command displays information for all Distributed APs

conﬁgured on this switch that have active connections:

DWS-1008# show dap connection

Total number of entries: 2

DAP Serial Id DAP IP Address Switch IP Address

2 112233 10.10.2.27 10.3.8.111

4 0333000298 10.10.3.34 10.3.8.111

The following command displays connection information speciﬁcally for a Distributed

1 2 ... 217 218 219 220 221 222 223 224 225 226 227 ... 405 406

Pas de commentaire

D-Link DWS-1008 Informations techniques Page 222