D-Link DWS-1008 Informations techniques télécharger pdf (Page 317)

100

101

316

DWS-1008 CLI Reference Guide

D-Link Systems, Inc.

802.1x Management Commands

set dot1x key-tx

Enables or disables the transmission of encryption key information to the supplicant (client)

in EAP over LAN (EAPoL) key messages, after authentication is successful.

Syntax: set dot1x key-tx {enable | disable}

enable

Enables transmission of encryption key

information to clients.

disable

Disables transmission of encryption key

information to clients.

Defaults: Key transmission is enabled by default.

Access: Enabled.

Examples: Type the following command to enable key transmission:

DWS-1008# set dot1x key-tx enable

success: dot1x key transmission enabled.

set dot1x max-req

Sets the maximum number of times the switch retransmits an EAP request to a supplicant

(client) before ending the authentication session.

Syntax: set dot1x max-req number-of-retransmissions

number-of-retransmissions Specify a value between 0 and 10.

Defaults: The default number of EAP retransmissions is 2.

Access: Enabled.

Usage: To support SSIDs that have both 802.1X and static WEP clients, MSS sends

a maximum of two ID requests, even if this parameter is set to a higher value.

Setting the parameter to a higher value does affect all other types of EAP

messages.

Examples: Type the following command to set the maximum number of EAP request

retransmissions to three attempts:

DWS-1008# set dot1x max-req 3

success: dot1x max request set to 3.

1 2 ... 312 313 314 315 316 317 318 319 320 321 322 ... 405 406

Commentaires sur ces manuels

Pas de commentaire

D-Link DWS-1008 Informations techniques Page 317

Commentaires sur ces manuels

Produits connexes et manuels pour Commutateurs de réseau D-Link DWS-1008