D-Link DWS-1008 Informations techniques télécharger pdf (Page 48)

100

101

DWS-1008 CLI Reference Guide

D-Link Systems, Inc.

VLAN Commands

set fdb (continued)

vlan vlan-id Name or number of a VLAN of which the port is a member. The entry is

added only for the speciﬁed VLAN.

tag tag-value VLAN tag value that identiﬁes a virtual port. You can specify a number from

1 through 4095. If you do not specify a tag value, an entry is created for

an untagged interface only. If you specify a tag value, an entry is created

only for the speciﬁed tagged interface.

Defaults: None.

Access: Enabled.

Usage: You cannot add a multicast or broadcast address as a permanent or static FDB

entry.

Examples: The following command adds a permanent entry for MAC address

00:11:22:aa:bb:cc on ports 3 and 5 in VLAN blue:

DWS-1008# set fdb perm 00:11:22:aa:bb:cc port 3,5 vlan blue

success: change accepted.

The following command adds a static entry for MAC address 00:2b:3c:4d:5e:6f on port 1 in

the default VLAN:

DWS-1008# set fdb static 00:2b:3c:4d:5e:6f port 1 vlan default

success: change accepted.

set fdb agingtime

Changes the aging timeout period for dynamic entries in the forwarding database.

Syntax: set fdb agingtime vlan-id age seconds

vlan-id VLAN name or number. The timeout period change applies only to

entries that match the speciﬁed VLAN.

age seconds Value for the timeout period, in seconds. You can specify a value from

0 through 1,000,000. If you change the timeout period to 0, aging is

disabled.

Defaults: The aging timeout period is 300 seconds (5 minutes).

Access: Enabled.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 405 406

Commentaires sur ces manuels

Pas de commentaire

D-Link DWS-1008 Informations techniques Page 48

Commentaires sur ces manuels

Produits connexes et manuels pour Commutateurs de réseau D-Link DWS-1008